주요 콘텐츠로 건너뛰기

필요한 것

  1. Lenovo IdeaCentre K410 Motherboard Replacement, Side Panel: 1 단계, 이미지 1/1
    • Lay the computer down on its side as shown.

    • Remove the two 14mm screws shown. The screws are loose enough to unscrew with your hands.

  2. Lenovo IdeaCentre K410 Motherboard Replacement: 2 단계, 이미지 1/1
    • Gently slide the side panel straight back and remove from the computer.

  3. Lenovo IdeaCentre K410 Motherboard Replacement, USB 3.0 Expansion Card: 3 단계, 이미지 1/1
    • With your hands remove the 14mm screw that holds the cover on the back panel.

    • Gently pull the flap back to expose the expansion card retaining screw.

  4. Lenovo IdeaCentre K410 Motherboard Replacement: 4 단계, 이미지 1/1
    • Use the Phillips #2 to remove the 8mm screw that holds the USB 3.0 Expansion Card in place.

  5. Lenovo IdeaCentre K410 Motherboard Replacement: 5 단계, 이미지 1/1
    • With moderate force, pull straight up on the expansion card to remove it from the computer.

  6. Lenovo IdeaCentre K410 Motherboard Replacement, RAM Module: 6 단계, 이미지 1/1
    • Push down on the white clips on both sides of the memory module to release it.

    • Gently pull up on the memory module to remove it from the unit.

  7. Lenovo IdeaCentre K410 Motherboard Replacement, CPU Fan: 7 단계, 이미지 1/1
    • Using the Phillips #00 Precision screwdriver, unscrew the four 12mm screws that hold the fan in place.

    • Be careful not to strip the screws.

  8. Lenovo IdeaCentre K410 Motherboard Replacement: 8 단계, 이미지 1/1
    • Unplug the fan from the motherboard by gently pulling out the single plug. Then lift the fan up and out of the computer.

  9. Lenovo IdeaCentre K410 Motherboard Replacement, Heat Sink: 9 단계, 이미지 1/1
    • Loosen the four screws that hold the heat sink in place using a Phillips #2 screwdriver.

    • The screws do not come all the way out of the heat sink

    • Pull the heat sink straight up to remove it.

  10. Lenovo IdeaCentre K410 Motherboard Replacement, CPU: 10 단계, 이미지 1/2 Lenovo IdeaCentre K410 Motherboard Replacement, CPU: 10 단계, 이미지 2/2
    • Remove the 2 8mm screws holding the CPU cover using a Torx #20 screwdriver.

    • Remove the 11 mm screw using a Torx #20 screwdriver.

    • Remove the cover and remove the CPU by gently pulling upward.

  11. Lenovo IdeaCentre K410 Motherboard Replacement, Motherboard: 11 단계, 이미지 1/3 Lenovo IdeaCentre K410 Motherboard Replacement, Motherboard: 11 단계, 이미지 2/3 Lenovo IdeaCentre K410 Motherboard Replacement, Motherboard: 11 단계, 이미지 3/3
    • Unplug all cords attached to the motherboard.

    • The largest connection requires a significant amount of force to be removed.

  12. Lenovo IdeaCentre K410 Motherboard Replacement: 12 단계, 이미지 1/2 Lenovo IdeaCentre K410 Motherboard Replacement: 12 단계, 이미지 2/2
    • Remove all 6 8mm screws attaching the motherboard to the base of the tower using a Phillips #2 screwdriver.

    • Gently pull the motherboard from the unit.

결론

To reassemble your device, follow these instructions in reverse order.

다른 10명이 해당 안내서를 완성하였습니다.

Timothy Grebe

회원 가입일: 2014년 10월 19일

1,565 평판

안내서 9개 작성하였습니다

Cal Poly, Team 10-39, Amido Fall 2014 Cal Poly, Team 10-39, Amido Fall 2014 회원

CPSU-AMIDO-F14S10G39

4 회원들

안내서 18개 작성하였습니다

0 Comments

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 13

30일 전: 90

전체 시간: 4,590