주요 콘텐츠로 건너뛰기

부품

지정된 부품이 없습니다.

  1. Lay the computer down on its side as shown.
    • Lay the computer down on its side as shown.

    • Remove the two 14mm screws shown. The screws are loose enough to unscrew with your hands.

  2. Gently slide the side panel straight back and remove from the computer.
    • Gently slide the side panel straight back and remove from the computer.

  3. 안드로이드 수리 키트

    A new screen or battery is one kit away.

    지금 장보기

    안드로이드 수리 키트

    A new screen or battery is one kit away.

    지금 장보기
  4. Unplug both sets of wires attaching the power supply unit to the motherboard. The largest connection requires a significant amount of force to be removed.
    • Unplug both sets of wires attaching the power supply unit to the motherboard.

    • The largest connection requires a significant amount of force to be removed.

  5. Unplug all cords attached to the optical drive and hard drive. Unplug all cords attached to the optical drive and hard drive. Unplug all cords attached to the optical drive and hard drive.
    • Unplug all cords attached to the optical drive and hard drive.

  6. Using the Phillips #2 driver, unscrew the four 8mm screws attaching the power supply unit to the outside of the computer.
    • Using the Phillips #2 driver, unscrew the four 8mm screws attaching the power supply unit to the outside of the computer.

  7. Remove the power supply unit by pulling away from the screw side and then out.
    • Remove the power supply unit by pulling away from the screw side and then out.

결론

To reassemble your device, follow these instructions in reverse order.

다른 5명이 해당 안내서를 완성하였습니다.

Timothy Grebe

회원 가입일: 2014년 10월 19일

1,376 평판

안내서 9개 작성하였습니다

Cal Poly, Team 10-39, Amido Fall 2014 Cal Poly, Team 10-39, Amido Fall 2014 회원

CPSU-AMIDO-F14S10G39

4 회원들

안내서 18개 작성하였습니다

What part do I need to replace the POWER BUTTON, it's broke and have to press inside to power on?

Tracy Estes - 답글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 17

전체 시간: 2,527