필요한 것
-
-
Lay the computer down on its side as shown.
-
Remove the two 14mm screws shown. The screws are loose enough to unscrew with your hands.
-
-
-
-
Push down on the white clips on both sides of the memory module to release it.
-
Gently pull up on the memory module to remove it from the unit.
-
To reassemble your device, follow these instructions in reverse order.
When inserting the memory module, make sure that the notch on it aligns correctly with the key on the memory connector. Push the module straight down into the connector until the retaining clips close.
To reassemble your device, follow these instructions in reverse order.
When inserting the memory module, make sure that the notch on it aligns correctly with the key on the memory connector. Push the module straight down into the connector until the retaining clips close.
다른 2명이 해당 안내서를 완성하였습니다.
팀
Cal Poly, Team 10-39, Amido Fall 2014 Cal Poly, Team 10-39, Amido Fall 2014 회원
CPSU-AMIDO-F14S10G39
4 회원들
안내서 18개 작성하였습니다
