주요 콘텐츠로 건너뛰기

Lenovo IdeaPad 100s-14IBR Speaker Replacement

필요한 것

  1. Lenovo IdeaPad 100s-14IBR Speaker Replacement, Speaker: 1 단계, 이미지 1/1
    • Remove the eight 4mm PH00 screws.

    • Remove the four 2mm PH00 screws.

  2. Lenovo IdeaPad 100s-14IBR Speaker Replacement: 2 단계, 이미지 1/2 Lenovo IdeaPad 100s-14IBR Speaker Replacement: 2 단계, 이미지 2/2
    • Use the nylon spudger to loosen the back cover from the back of the device.

    • You may hear a bit of a snapping sound, but this is normal.

  3. Lenovo IdeaPad 100s-14IBR Speaker Replacement: 3 단계, 이미지 1/1
    • For safety reasons, disconnect the wires connecting the battery to the motherboard with the nylon spudger.

    • Remove the six 4mm Phillips #00 screws.

    • Remove the battery using the nylon spudger.

  4. Lenovo IdeaPad 100s-14IBR Speaker Replacement: 4 단계, 이미지 1/2 Lenovo IdeaPad 100s-14IBR Speaker Replacement: 4 단계, 이미지 2/2
    • Remove the four 2mm PH00 screws.

    • Unplug the speakers from the motherboard.

    • Remove the two 4mm PH00 screws from the metal shield on the trackpad.

    • Lift the metal shield up slightly, being very careful not to move the ribbon cables too much. Move the speaker cables out from under the shield.

  5. Lenovo IdeaPad 100s-14IBR Speaker Replacement: 5 단계, 이미지 1/1
    • Lift the speakers from the case being careful of the wires connecting them. Put them to the side.

결론

To reassemble your device, follow these instructions in reverse order.

Bin Feng

회원 가입일: 03/18/19

256 평판

안내서 2개 작성하였습니다

University of Memphis, Team S1-G3, Kim Spring 2019 University of Memphis, Team S1-G3, Kim Spring 2019 회원

UM-KIM-S19S1G3

3 회원들

안내서 9개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 3

전체 시간: 390