Lenovo IdeaPad 130-15AST Speaker Replacement

소개

Use this guide to remove the Speakers from the Lenovo 130-15AST . The speaker is a output hardware device that connects to the laptop to create sound. The speakers may be inoperable even though the volume is turned all the way up and the mute button is off. This could be due to faulty speakers or speaker connections. The replacement guide requires the use of the following tools: Jimmy, Prying & Opening Tool Assortment, Phillips Head #00 & #0 Screwdrivers, and Tweezers.

필요한 것

1 단계 DVD/CD Optical Drive

Lenovo IdeaPad 130-15AST Speaker Replacement, DVD/CD Optical Drive: 1 단계, 이미지 1/1

Verify that the DVD/CD Tray is free of DVD's and CD's.
Using a Phillips #00 screwdriver, remove one of the 6.0mm screws.

번역하기

2 단계

Using the Jimmy Tool, gently pry the DVD/CD Drive away from the case of the laptop.

번역하기

3 단계

Gently slide the DVD/CD Drive out of the laptop.

번역하기

4 단계 Battery

Lenovo IdeaPad 130-15AST Speaker Replacement, Battery: 4 단계, 이미지 1/1

Before proceeding, make sure the computer is turned off and it is not connected to any power source.
Using a Phillips #00 screwdriver, remove twelve of the 6.0mm screws.

번역하기

5 단계

Lenovo IdeaPad 130-15AST Speaker Replacement: 5 단계, 이미지 3/3

Do not try to completely remove this case without ensuring the entire case is free of connection points as this could crack or damage the case.
Use a thin, flat edge to gently break the seal of the case.

번역하기

6 단계

Make sure that the back panel is completely free from the laptop.
Grab the sides of the back panel of the laptop with two hands. Then separate the panel from the laptop by lifting up.

번역하기

7 단계

Using a Phillips #0 screwdriver, remove three 6.0mm screws.

번역하기

8 단계

Lenovo IdeaPad 130-15AST Speaker Replacement: 8 단계, 이미지 3/3

Using a pair of tweezers, remove the black plug which includes 8 wires.

번역하기

9 단계

Grabbing the sides of the battery with one hand, remove the battery from the laptop.

번역하기

10 단계 Speaker

Lenovo IdeaPad 130-15AST Speaker Replacement, Speaker: 10 단계, 이미지 1/1

Using a prying tool, remove the white plug (which includes 4 different colored wires) from the motherboard. Repeat the same step for the other plug.
This plug is small and fragile. You should not use a lot of force to separate the plastic connection from the motherboard.

번역하기

11 단계

Disconnect the speaker wires from their connection tabs along the front of the computer.
These wires are not connected to anything internally. They connect the speakers from the power supply to each other.

번역하기

12 단계

To remove the speakers, pinch the inside edge and lift upwards.
These speakers are help in by O-rings. Be sure not to lose these, as new speakers do not come with new O-rings.

번역하기