주요 콘텐츠로 건너뛰기

소개

If the device isn't powering on, then the issue may be due to the battery. Follow these steps to replace the battery.

  1. Turn over the device so that the bottom is facing up. Make sure the hinged side is facing you.
    • Turn over the device so that the bottom is facing up. Make sure the hinged side is facing you.

  2. Move the right switch towards the right until it clicks in place. You should then see the color red reveal from where the switch was originally.
    • Move the right switch towards the right until it clicks in place. You should then see the color red reveal from where the switch was originally.

  3. Now take your left hand and slide the left switch to the left.
    • Now take your left hand and slide the left switch to the left.

    • This switch will not click in place like the other switch, so make sure to keep your left hand on the switch.

  4. Take your free hand and place it on the battery. Gently slide it away from its slot.
    • Take your free hand and place it on the battery. Gently slide it away from its slot.

결론

To reassemble your device, follow these instructions in reverse order.

Alex Amorim

회원 가입일: 2018년 03월 19일

721 평판

안내서 5개 작성하였습니다

UMass Dartmouth, Team S5-G2, Peak Spring 2018 UMass Dartmouth, Team S5-G2, Peak Spring 2018 회원

UMASSD-PEAK-S18S5G2

2 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 3

전체 시간: 102