주요 콘텐츠로 건너뛰기

소개

The hard disk drive is the data storage device for your computer. If it breaks, you may choose to replace it with either another 2.5" SATA hard drive or an SSD. An SSD does not have any moving parts, is more resistant to shock, has faster read and write speeds, and runs quieter than a hard disk drive. However, SSDs are also more expensive.

부품

지정된 부품이 없습니다.

  1. Unscrew the six screws on the back panel of the laptop using a PH1 Phillips bit.
    • Unscrew the six screws on the back panel of the laptop using a PH1 Phillips bit.

    • These screws are attached to the panel. When unscrewing, be sure to stop when you here a click.

  2. Lift the back panel from the side closest to the battery and remove the panel.
    • Lift the back panel from the side closest to the battery and remove the panel.

  3. Slide the hard drive to the right, away from the RAM modules. Lift the hard drive from the side closest to the RAM modules.
    • Slide the hard drive to the right, away from the RAM modules.

    • Lift the hard drive from the side closest to the RAM modules.

    • When re-inserting the hard drive, ensure that the copper contacts on the drive's connector are facing upwards.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

James Morizzo

회원 가입일: 2014년 09월 29일

472 평판

안내서 3개 작성하였습니다

USF Tampa, Team 1-4, Hickman Fall 2014 USF Tampa, Team 1-4, Hickman Fall 2014 회원

USFT-HICKMAN-F14S1G4

3 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 2

지난 30일: 3

전체 시간: 1,301