주요 콘텐츠로 건너뛰기
  1. It is important that you power off your laptop before you begin.
    • It is important that you power off your laptop before you begin.

    • Find and remove the 10 Phillips style body screws on the bottom of the laptop case.

    • Remove 2 screws, 1 located on the left hinge cover and one located on the right hinge cover.

  2. 안드로이드 수리 키트

    A new screen or battery is one kit away.

    지금 장보기

    안드로이드 수리 키트

    A new screen or battery is one kit away.

    지금 장보기
  3. Starting from the front, use a plastic opening tool to separate the bottom of the case from the body of the laptop. Starting from the front, use a plastic opening tool to separate the bottom of the case from the body of the laptop.
    • Starting from the front, use a plastic opening tool to separate the bottom of the case from the body of the laptop.

  4. Disconnect charging port from motherboard. To do this, press the spudger on the center dimple and push the connector out.
    • Disconnect charging port from motherboard.

    • To do this, press the spudger on the center dimple and push the connector out.

  5. Pry the charging port out of the socket with a metal spudger. It may be necessary to pry from each side.
    • Pry the charging port out of the socket with a metal spudger.

    • It may be necessary to pry from each side.

  6. Remove charging port from laptop.
    • Remove charging port from laptop.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Patrick Ripkey

회원 가입일: 2017년 02월 28일

606 평판

안내서 5개 작성하였습니다

USF Tampa, Team S2-G6, Nance Spring 2017 USF Tampa, Team S2-G6, Nance Spring 2017 회원

USFT-NANCE-S17S2G6

3 회원들

안내서 9개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 2

지난 7일: 9

지난 30일: 26

전체 시간: 758