Lenovo IdeaTab A2109 Camera Assembly Replacement - iFixit 수리 안내서

소개

Use this guide to replace the front and rear cameras.

필요한 것

1 단계 Camera Assembly

Lenovo IdeaTab A2109 Camera Assembly Replacement, Camera Assembly: 1 단계, 이미지 1/1

Look at the back of the tablet and locate the speakers on top of the rear cover.
Locate the small indentation in the plastic cover that runs across the top of the device.
Wedge the plastic opening tool in this indentation, under the middle of the cover as shown.
Pry up and push to remove the cover.

2 단계

Lenovo IdeaTab A2109 Camera Assembly Replacement: 2 단계, 이미지 1/2

Lenovo IdeaTab A2109 Camera Assembly Replacement: 2 단계, 이미지 2/2

Remove the following two screws:
M3.0 x 3.0 mm #00 phillips screws (black)

3 단계

Lenovo IdeaTab A2109 Camera Assembly Replacement: 3 단계, 이미지 1/3

Lenovo IdeaTab A2109 Camera Assembly Replacement: 3 단계, 이미지 2/3

Lenovo IdeaTab A2109 Camera Assembly Replacement: 3 단계, 이미지 3/3

Pry open the front and rear faces using a plastic opening tool.
It may take a little force to separate the front and rear faces of the device.
Slide the plastic opening tool to one corner.
Place another plastic opening tool into the gap and slide it to the opposite corner as shown.
Pull the rear cover up and back to separate it from front face of the device.

4 단계

Lenovo IdeaTab A2109 Camera Assembly Replacement: 4 단계, 이미지 1/1

Slide the rear camera ribbon from the system board.
Pull up on the black plastic lock on the system board for the front camera and slide the ribbon out.
Now, you are ready to remove the front and rear facing cameras.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 6명과 함께

Abigail Bertholf

회원 가입일: 04/14/14

521 평판

안내서 1개 작성함

배지 +6개 더

팀

Cal Poly, Team 7-19, Regan Spring 2014 Cal Poly, Team 7-19, Regan Spring 2014 회원

CPSU-REGAN-S14S7G19

4 회원들

안내서 15개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 577