주요 콘텐츠로 건너뛰기

Lenovo Ideapad 110S-11IBR Thermal paste Replacement

필요한 것

  1. Lenovo Ideapad 110S-11IBR Thermal paste Replacement, Battery: 1 단계, 이미지 1/1
    • Ensure that your device is completely OFF before performing this procedure.

    • Unscrew the eleven 4 mm Phillips #0 screws on the bottom of the device.

  2. Lenovo Ideapad 110S-11IBR Thermal paste Replacement: 2 단계, 이미지 1/2 Lenovo Ideapad 110S-11IBR Thermal paste Replacement: 2 단계, 이미지 2/2
    • Separate the back lid from the laptop using a plastic opening tool.

    • Lift the back lid off of the device.

  3. Lenovo Ideapad 110S-11IBR Thermal paste Replacement: 3 단계, 이미지 1/2 Lenovo Ideapad 110S-11IBR Thermal paste Replacement: 3 단계, 이미지 2/2
    • Remove the battery connector from its socket by pulling the cable away from the hinge using your fingers or a plastic opening tool.

    • Do not pull on the socket itself or you risk damaging the motherboard.

    • Remove the two pieces of tape that are holding the battery down.

  4. Lenovo Ideapad 110S-11IBR Thermal paste Replacement: 4 단계, 이미지 1/1
    • Remove the five 4 mm Phillips screws securing the battery.

  5. Lenovo Ideapad 110S-11IBR Thermal paste Replacement: 5 단계, 이미지 1/2 Lenovo Ideapad 110S-11IBR Thermal paste Replacement: 5 단계, 이미지 2/2
    • Lift the battery up and out of the device.

    • once the battery is removed unscrew the coldplate and pull it free from the mainboard.

    • Using Isopropyl alcohol and a microfiber cloth, wipe away the old thermal compound, make sure to clean the coldplate and CPU die.

    • apply about half a gram of non-conductive thermal compound to the heat spreader of the CPU and replace the coldplate pressing down gently.

결론

To reassemble your device, follow these instructions in reverse order.

[deleted]

회원 가입일: 08/14/21

355 평판

안내서 1개 작성함

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 173