소개

This guide will show you how to remove and replace the hard drive for the device.

Before you start replacing the hard drive, make sure to turn the device off, remove the battery and disconnect the laptop from any power source.

  1. Before you proceed, make sure your computer is turned off and is not connected to any power source.
    • Before you proceed, make sure your computer is turned off and is not connected to any power source.

    • Orient the laptop in such a way that the bottom is facing up and the optical drive is facing to the left of yourself.

  2. Remove the 7mm Phillips #1 screw. Be sure to store the screws carefully as they are easy to lose. A magnetic project mat is recommended
    • Remove the 7mm Phillips #1 screw.

    • Be sure to store the screws carefully as they are easy to lose. A magnetic project mat is recommended

  3. Carefully remove the optical drive bracket by pulling the bezel away from the laptop. Carefully remove the optical drive bracket by pulling the bezel away from the laptop. Carefully remove the optical drive bracket by pulling the bezel away from the laptop.
    • Carefully remove the optical drive bracket by pulling the bezel away from the laptop.

  4. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  5. Using the Phillips #1 screwdriver, remove the twelve screws around the back panel from the laptop. Using the Phillips #1 screwdriver, remove the twelve screws around the back panel from the laptop.
    • Using the Phillips #1 screwdriver, remove the twelve screws around the back panel from the laptop.

  6. Use an opening tool to pry out the  back cover. Use an opening tool to pry out the  back cover. Use an opening tool to pry out the  back cover.
    • Use an opening tool to pry out the back cover.

  7. Remove the back panel by pulling it up and away from the laptop. Remove the back panel by pulling it up and away from the laptop. Remove the back panel by pulling it up and away from the laptop.
    • Remove the back panel by pulling it up and away from the laptop.

  8. Before removing the drive, make a backup copy of all the information on it if possible. Never remove the drive while the system is operating or in suspend mode. Gently lift up the hard disk from the left.
    • Before removing the drive, make a backup copy of all the information on it if possible. Never remove the drive while the system is operating or in suspend mode.

    • Gently lift up the hard disk from the left.

  9. Do not lift hard drive straight up as it risks  breaking the connection port. Carefully pull the hard drive away and out of the connection port. Carefully pull the hard drive away and out of the connection port.
    • Do not lift hard drive straight up as it risks breaking the connection port.

    • Carefully pull the hard drive away and out of the connection port.

  10. Detach the bracket from the hard drive by pulling the bracket edges apart. Detach the bracket from the hard drive by pulling the bracket edges apart. Detach the bracket from the hard drive by pulling the bracket edges apart.
    • Detach the bracket from the hard drive by pulling the bracket edges apart.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Anurag Deb

회원 가입일: 2018년 10월 31일

337 평판

안내서 3개 작성하였습니다

조회 통계:

지난 24시간: 16

지난 7일: 80

지난 30일: 249

전체 시간: 527