주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

소개

By the end of this guide, you will be able to remove the back panel from the laptop.

부품

지정된 부품이 없습니다.

  1. Start by removing the feet near the LCD hinge of the laptop to reveal two screws. Using a Phillips #1 screwdriver, remove the top five (30 mm) screws underneath the battery.
    • Start by removing the feet near the LCD hinge of the laptop to reveal two screws.

    • Using a Phillips #1 screwdriver, remove the top five (30 mm) screws underneath the battery.

  2. Once both feet are removed, two  (40 mm) screws will reveal themselves. Unscrew these. Once both feet are removed, two  (40 mm) screws will reveal themselves. Unscrew these.
    • Once both feet are removed, two (40 mm) screws will reveal themselves. Unscrew these.

  3. Nintendo Switch 키트

    게임으로 돌아가기 위한 빠른 해결책

    Nintendo Switch 키트 쇼핑하기

    Nintendo Switch 키트

    게임으로 돌아가기 위한 빠른 해결책

    Nintendo Switch 키트 쇼핑하기
  4. Working your way around the outer edges of the Flex 15, remove the 8 (30 mm) outer screws. Working your way around the outer edges of the Flex 15, remove the 8 (30 mm) outer screws. Working your way around the outer edges of the Flex 15, remove the 8 (30 mm) outer screws.
    • Working your way around the outer edges of the Flex 15, remove the 8 (30 mm) outer screws.

  5. Remove the one (40 mm) screw in the middle of the Flex 15.
    • Remove the one (40 mm) screw in the middle of the Flex 15.

  6. Using a plastic opening tool, make your way around the edge of the laptop. There is a visible line between the bottom shell of the laptop and the laptop body itself. There is a visible line between the bottom shell of the laptop and the laptop body itself.
    • Using a plastic opening tool, make your way around the edge of the laptop.

    • There is a visible line between the bottom shell of the laptop and the laptop body itself.

  7. Make sure to pry evenly around this edge and only remove the bottom of the laptop when it is fully loose. Using excessive force may break the bottom plastic. There are plastic clips along the edge of the laptop.
    • Make sure to pry evenly around this edge and only remove the bottom of the laptop when it is fully loose.

    • Using excessive force may break the bottom plastic. There are plastic clips along the edge of the laptop.

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

Brent

회원 가입일: 2016년 03월 04일

804 평판

안내서 6개 작성하였습니다

UMass Dartmouth, Team 6-6, Bhusal Spring 2016 UMass Dartmouth, Team 6-6, Bhusal Spring 2016 회원

UMASSD-BHUSAL-S16S6G6

3 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 6

30일 전: 23

전체 시간: 1,829