주요 콘텐츠로 건너뛰기

소개

If the laptop is loud, sounds irregular, and the bottom is hot, use this guide to replace your cooling fan.

  1. Turn off your laptop before you begin.
    • Turn off your laptop before you begin.

  2. Remove the nine 6mm screws circled in the picture using a T5 Torx Screwdriver. Remove the two 10mm screws circled in the picture using the same T5 Torx Screwdriver.
    • Remove the nine 6mm screws circled in the picture using a T5 Torx Screwdriver.

    • Remove the two 10mm screws circled in the picture using the same T5 Torx Screwdriver.

  3. After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off. After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off.
    • After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off.

  4. Remove the three 5mm screws using the T5 Torx Screwdriver. Remove the three 5mm screws using the T5 Torx Screwdriver.
    • Remove the three 5mm screws using the T5 Torx Screwdriver.

  5. Pull black wire and gray wire away from cooling fan clips using the tweezers. Pull black wire and gray wire away from cooling fan clips using the tweezers.
    • Pull black wire and gray wire away from cooling fan clips using the tweezers.

  6. Pull out the cooling fan from where it is attached and pull it up until you see where the wire is attached to the motherboard. Using the iFixit Opening Tools, detach the connector. Pull out the cooling fan from where it is attached and pull it up until you see where the wire is attached to the motherboard. Using the iFixit Opening Tools, detach the connector. Pull out the cooling fan from where it is attached and pull it up until you see where the wire is attached to the motherboard. Using the iFixit Opening Tools, detach the connector.
    • Pull out the cooling fan from where it is attached and pull it up until you see where the wire is attached to the motherboard. Using the iFixit Opening Tools, detach the connector.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Isaiah Vang

회원 가입일: 2018년 10월 04일

645 평판

안내서 6개 작성하였습니다

UW Stout, Team S6-G6, Ogden Fall 2018 UW Stout, Team S6-G6, Ogden Fall 2018 회원

UWSTOUT-OGDEN-F18S6G6

4 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 6

전체 시간: 138