주요 콘텐츠로 건너뛰기

소개

If you are unable to move the mouse and it is overly sensitive, use this guide to replace your touchpad.

  1. Turn off your laptop before you begin.
    • Turn off your laptop before you begin.

  2. Remove the nine 6mm screws circled in the picture using a T5 Torx Screwdriver. Remove the two 10mm screws circled in the picture using the same T5 Torx Screwdriver.
    • Remove the nine 6mm screws circled in the picture using a T5 Torx Screwdriver.

    • Remove the two 10mm screws circled in the picture using the same T5 Torx Screwdriver.

  3. After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off. After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off.
    • After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off.

  4. Remove the three 4 mm screws circled in the picture on the left using a T5 Torx Screwdriver. Remove the three 4 mm screws circled in the picture on the left using a T5 Torx Screwdriver.
    • Remove the three 4 mm screws circled in the picture on the left using a T5 Torx Screwdriver.

  5. Gently lift the battery up and locate the connector.
    • Gently lift the battery up and locate the connector.

    • Disconnect it from the motherboard using an iFixit Opening tool or by firmly grasping it and pulling it out.

  6. Locate the touch pad and remove the two 3 mm screws using a T5 Torx Screwdriver.
    • Locate the touch pad and remove the two 3 mm screws using a T5 Torx Screwdriver.

  7. Disconnect the touch pad chip from the motherboard.
    • Disconnect the touch pad chip from the motherboard.

  8. Disconnect the bronze piece of tape from touch pad and set it off to the side.
    • Disconnect the bronze piece of tape from touch pad and set it off to the side.

  9. Open the laptop and, with the assistance of the iFixit blue plastic tool, guide the touch pad through, it should come out on its own. Open the laptop and, with the assistance of the iFixit blue plastic tool, guide the touch pad through, it should come out on its own.
    • Open the laptop and, with the assistance of the iFixit blue plastic tool, guide the touch pad through, it should come out on its own.

결론

To reassemble your device, follow these instructions in reverse order.

Isaiah Vang

회원 가입일: 2018년 10월 04일

645 평판

안내서 6개 작성하였습니다

UW Stout, Team S6-G6, Ogden Fall 2018 UW Stout, Team S6-G6, Ogden Fall 2018 회원

UWSTOUT-OGDEN-F18S6G6

4 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 4

전체 시간: 123