주요 콘텐츠로 건너뛰기

소개

If your computer will not turn on, there may be a problem with the hard drive. This guide will help replace the hard drive in your laptop, and is moderately difficult. Make sure to have a Phillips #0 screwdriver on hand to achieve the steps in this guide.

부품

지정된 부품이 없습니다.

  1. Flip laptop over bottom side up.
    • Flip laptop over bottom side up.

    • Locate the two battery release switches.

  2. Use your finger to push the battery release switch labeled "1." The red indicates that the switch is unlocked.
    • Use your finger to push the battery release switch labeled "1." The red indicates that the switch is unlocked.

  3. Use your finger to push the battery switch labeled "2."
    • Use your finger to push the battery switch labeled "2."

  4. Once both switches are unlocked, the battery will release.
    • Once both switches are unlocked, the battery will release.

  5. 안드로이드 수리 키트

    A new screen or battery is one kit away.

    지금 장보기

    안드로이드 수리 키트

    A new screen or battery is one kit away.

    지금 장보기
  6. When replacing the battery make sure the two protruding holes line up with the slot.
    • When replacing the battery make sure the two protruding holes line up with the slot.

    • Carefully remove the battery.

  7. Locate the five black screws on the back. Use a Phillips #0 screwdriver to remove all five black 6 mm screws.
    • Locate the five black screws on the back.

    • Use a Phillips #0 screwdriver to remove all five black 6 mm screws.

  8. Locate the three silver screws underneath the battery. Use the Phillips #0 screwdriver to remove all three 4 mm screws.
    • Locate the three silver screws underneath the battery.

    • Use the Phillips #0 screwdriver to remove all three 4 mm screws.

  9. Locate the four rubber stoppers near each corner of the laptop. Open up the stopper with your hands. Use the Phillips #0 screwdriver to remove the 6 mm screws underneath all four stoppers.
    • Locate the four rubber stoppers near each corner of the laptop.

    • Open up the stopper with your hands.

    • Use the Phillips #0 screwdriver to remove the 6 mm screws underneath all four stoppers.

  10. Open the laptop carefully.
    • Open the laptop carefully.

  11. Locate the hard drive. Use the Phillips #0 screwdriver to remove the two 4 mm screws that are holding the hard drive in place.
    • Locate the hard drive.

    • Use the Phillips #0 screwdriver to remove the two 4 mm screws that are holding the hard drive in place.

  12. The hard drive is now removed from the laptop.
    • The hard drive is now removed from the laptop.

  13. Once the hard drive is removed, locate the four screws that hold the metal frame to the hard drive. Use the Phillips #0 screwdriver to remove the 4 mm silver screws on all sides.
    • Once the hard drive is removed, locate the four screws that hold the metal frame to the hard drive.

    • Use the Phillips #0 screwdriver to remove the 4 mm silver screws on all sides.

결론

To reassemble your device, follow these instructions in reverse order.

Casey Zhang

회원 가입일: 2019년 02월 06일

315 평판

안내서 2개 작성하였습니다

UC Davis, Team S20-G5, Lore Winter 2019 UC Davis, Team S20-G5, Lore Winter 2019 회원

UCD-LORE-W19S20G5

3 회원들

안내서 4개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 2

지난 30일: 13

전체 시간: 65