기기를 수리하세요 커뮤니티 상점

Lenovo Tab 2 A8 Front-Facing Camera Replacement

소개

This guide illustrates the procedure to remove the front-facing camera of your device.

필요한 것

  1. Lenovo Tab 2 A8 Front-Facing Camera Replacement, Removing the Back Panel: 1 단계, 이미지 1/3 Lenovo Tab 2 A8 Front-Facing Camera Replacement, Removing the Back Panel: 1 단계, 이미지 2/3 Lenovo Tab 2 A8 Front-Facing Camera Replacement, Removing the Back Panel: 1 단계, 이미지 3/3

    • Place the tablet face down on a soft, stable surface that will protect the screen.

    • Next, Scrape off the seal over the screw in the back of the tablet with a Metal Spudger.

    • Use the Phillips #000 Screwdriver to remove the M1.4 × 2.5 screw.

    • If the seal covering the screw has already been removed, please proceed to the next step in the process.

    • As the screw is small, you may wish to extract it using a pair of tweezers.

    번역하기

  2. Lenovo Tab 2 A8 Front-Facing Camera Replacement: 2 단계, 이미지 1/3 Lenovo Tab 2 A8 Front-Facing Camera Replacement: 2 단계, 이미지 2/3 Lenovo Tab 2 A8 Front-Facing Camera Replacement: 2 단계, 이미지 3/3

    • Starting on the side, work your way around the the tablet to pop off the back cover. You will want to utilize a metal Spudger for this.

    • Some force may be required initially to pry the back cover off.

    • Note that the button tabs for this device are loose inside the case and will fall out when opening.

    번역하기

  4. Lenovo Tab 2 A8 Front-Facing Camera Replacement, Front-Facing Camera: 3 단계, 이미지 1/1

    • Using tweezers, peel off the anti-static sticker from the camera connection port.

    번역하기

  5. Lenovo Tab 2 A8 Front-Facing Camera Replacement: 4 단계, 이미지 1/1

    • Lift the camera out of its socket in the motherboard. Then, using tweezers to grasp the camera connector, carefully pull the connector horizontally out of the port.

    • Be aware that the camera connector will be firmly lodged in the port. When successfully removed, the top side of the port pops up.

    번역하기

  6. Lenovo Tab 2 A8 Front-Facing Camera Replacement: 5 단계, 이미지 1/1

    • Using tweezers to grasp the camera connector, lift the camera out of its socket.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Tim Gales

회원 가입일: 10/06/15

478 평판

안내서 3개 작성하였습니다

배지: 10

배지 +7개 더

팀

Eastern Washington University, Team 2-4, Plummer Fall 2015 Eastern Washington University, Team 2-4, Plummer Fall 2015 회원

EWU-PLUMMER-F15S2G4

4 회원들

안내서 13개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 2

전체 시간: 1,017