Lenovo ThinkPad X1 Carbon 7th Gen Back Cover Replacement

소개

Use this guide to remove or replace the back cover on a Lenovo ThinkPad X1 Carbon 7th Gen laptop.

Before you perform this repair, be sure to completely power off and unplug your laptop. Make sure the laptop is not in standby, sleep, or hibernation mode.

필요한 것

1 단계 Back cover removal

Lenovo ThinkPad X1 Carbon 7th Gen Back Cover Replacement, Back cover removal: 1 단계, 이미지 1/2

Lenovo ThinkPad X1 Carbon 7th Gen Back Cover Replacement, Back cover removal: 1 단계, 이미지 2/2

Use a Phillips #1 screwdriver to loosen the five captive screws securing the back cover.

편집

2 단계 Insert an opening pick

Lenovo ThinkPad X1 Carbon 7th Gen Back Cover Replacement, Insert an opening pick: 2 단계, 이미지 1/3

Lenovo ThinkPad X1 Carbon 7th Gen Back Cover Replacement, Insert an opening pick: 2 단계, 이미지 2/3

Lenovo ThinkPad X1 Carbon 7th Gen Back Cover Replacement, Insert an opening pick: 2 단계, 이미지 3/3

Insert an opening pick at a 45˚ angle between the back cover and frame near the rear middle screw.
Pry up on the pick to release the clips securing the back cover to the frame.
You will hear several clicks while prying up.

편집

3 단계 Remove the back cover

Lenovo ThinkPad X1 Carbon 7th Gen Back Cover Replacement, Remove the back cover: 3 단계, 이미지 1/3

Lenovo ThinkPad X1 Carbon 7th Gen Back Cover Replacement, Remove the back cover: 3 단계, 이미지 2/3

Lenovo ThinkPad X1 Carbon 7th Gen Back Cover Replacement, Remove the back cover: 3 단계, 이미지 3/3

Lift the back cover up and remove it from the chassis.
You will hear several clicks while lifting up.
During reassembly, this is a good point to power on your laptop and test all functions before sealing it up. Be sure to power your laptop back down before you continue working.