주요 콘텐츠로 건너뛰기

소개

The Lenovo Yoga battery loses charge quickly. You have already tried unplugging it when it is fully charged, or adjusting the light to save energy. You may need to replace the battery. This guide will help you.

  1. Flip the device having the bottom panel facing you.
    • Flip the device having the bottom panel facing you.

    • Remove the eleven 5mm Torx T5 screws from the back panel.

  2. Remove the back panel carefully.
    • Remove the back panel carefully.

    • To remove the back cover, there are 5 plastic snap hooks that must be dislodged with a spudger or plastic pick tool.

    • Lay the device upside down with hinges away from you. Tilt it at 45 degree angle, leaving hinges down and open the screen slightly. Apply a little pressure on one corner to see where it separates. Then work from side to side to separate the back case from the top case. The back case is a shell with no components in it.

  3. Remove the two 3mm Phillips #1 screws that are holding the battery to the device. Hold the bundled cable connector on each side and carefully pull the connector to release it from the motherboard.
    • Remove the two 3mm Phillips #1 screws that are holding the battery to the device.

    • Hold the bundled cable connector on each side and carefully pull the connector to release it from the motherboard.

  4. Remove the battery carefully from the device by lifting up the edge nearest you and then gently pull toward you to disconnect the power wires.
    • Remove the battery carefully from the device by lifting up the edge nearest you and then gently pull toward you to disconnect the power wires.

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

Teairra Woods

회원 가입일: 2017년 04월 11일

261 평판

안내서 2개 작성하였습니다

University of Memphis, Team S1-G4, Kim Spring 2017 University of Memphis, Team S1-G4, Kim Spring 2017 회원

UM-KIM-S17S1G4

4 회원들

안내서 2개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 5

30일 전: 9

전체 시간: 2,017