주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

This guide will show you how to replace your trackpad if it is broken or defective.

  1. Remove the ten 3.3 mm screws from the base cover using the T5 Torx screwdriver.
    • Remove the ten 3.3 mm screws from the base cover using the T5 Torx screwdriver.

  2. Slide opening tool between the base and back cover.
    • Slide opening tool between the base and back cover.

  3. Lift back cover.
    • Lift back cover.

  4. Remove the four 3.5 mm screws around the battery using the Phillips 00 screwdriver.
    • Remove the four 3.5 mm screws around the battery using the Phillips 00 screwdriver.

  5. Disconnect the battery from the motherboard.
    • Disconnect the battery from the motherboard.

  6. Lift battery up gently to remove.
    • Lift battery up gently to remove.

  7. Use the JIS 1 screwdriver bit to unscrew the 3 screws.
    • Use the JIS 1 screwdriver bit to unscrew the 3 screws.

  8. Grip the tab firmly.
    • Grip the tab firmly.

  9. Pull tab until it disconnects from the trackpad. Be gentle - you do not want to damage any part of the tab.
    • Pull tab until it disconnects from the trackpad. Be gentle - you do not want to damage any part of the tab.

  10. Gently lift the tape with angled tweezers.
    • Gently lift the tape with angled tweezers.

  11. Push the trackpad to remove it.
    • Push the trackpad to remove it.

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

Hanna Deon

회원 가입일: 2017년 09월 28일

191 평판

안내서 1개 작성함

University of Maine, Team S1-G5, Diaz Fall 2017 University of Maine, Team S1-G5, Diaz Fall 2017 회원

UMAINE-DIAZ-F17S1G5

4 회원들

안내서 10개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 10

30일 전: 26

전체 시간: 2,364