주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

부품

지정된 부품이 없습니다.

  1. Open the built-in kickstand.
    • Open the built-in kickstand.

  2. Remove the sticker located directly under the the built-in kickstand to reveal two 0.75 mm screws. Remove the microSD card slot cover.  Remove any microSD card (if inserted). Using a Phillips head screwdriver, remove the  three 0.75 mm screws.
    • Remove the sticker located directly under the the built-in kickstand to reveal two 0.75 mm screws.

    • Remove the microSD card slot cover. Remove any microSD card (if inserted).

    • Using a Phillips head screwdriver, remove the three 0.75 mm screws.

  3. Orient the device so the screen is facing you. Carefully insert the spudger along the seam between the screen and back cover and gently separate the back cover from the device frame. Continue to detach the backplate from the frame by moving the spudger around the perimeter.
    • Orient the device so the screen is facing you.

    • Carefully insert the spudger along the seam between the screen and back cover and gently separate the back cover from the device frame.

    • Continue to detach the backplate from the frame by moving the spudger around the perimeter.

    • Some force will be required to detach the small plastic braces securing the backplate to the device.

  4. Nintendo Switch 수리 키트

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch 수리 키트

    A quick fix to get back in the game

    Shop Switch Kits
  5. Remove the 3 screws from the auxiliary port cover. Use the spudger to gently push the auxiliary module out of the way. Remove the detachable plastic latch located in front of the hinge.
    • Remove the 3 screws from the auxiliary port cover.

    • Use the spudger to gently push the auxiliary module out of the way.

    • Remove the detachable plastic latch located in front of the hinge.

  6. Use a spudger to gently remove the hinge.
    • Use a spudger to gently remove the hinge.

  7. Carefully lift the kickstand away from the frame.
    • Carefully lift the kickstand away from the frame.

    • The battery is located inside of the kickstand. Ensure proper handling and care.

  8. Use the pointed end of a spudger to push in the camera's locking mechanism. Upon releasing the camera lock lift the camera out and locate the three screws.
    • Use the pointed end of a spudger to push in the camera's locking mechanism.

    • Upon releasing the camera lock lift the camera out and locate the three screws.

  9. Use a J000 Philips screwdriver to remove the three  screws. Remove the camera cover that seals the camera case. Remove the camera from the shell.
    • Use a J000 Philips screwdriver to remove the three screws.

    • Remove the camera cover that seals the camera case.

    • Remove the camera from the shell.

  10. Separate the camera from its casing.
    • Separate the camera from its casing.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Phanudej

회원 가입일: 2017년 02월 20일

867 평판

안내서 5개 작성하였습니다

USF Tampa, Team S3-G2, Sullivan Spring 2017 USF Tampa, Team S3-G2, Sullivan Spring 2017 회원

USFT-SULLIVAN-S17S3G2

4 회원들

안내서 12개 작성하였습니다

Thanks for describing in details with bit and peaces very neatly and clearly. I fix the problem of my Lenovo Yoga 3 with help of this. Great job you have done.. keep it up… Sisira

Sisira Kumara - 답글

댓글 쓰기

조회 통계:

24 시간 전: 5

7일 전: 19

30일 전: 65

전체 시간: 2,251