기기를 수리하세요 커뮤니티 상점

Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal

소개

If you just can't find out what is wrong with your disco ball, you will probably need to open it to troubleshoot it. This guide will walk you through the steps to do that.

필요한 것

  1. Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal, Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal: 1 단계, 이미지 1/1

    • Turn the device over so that the base is on top.

    번역하기

  3. Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal: 2 단계, 이미지 1/1

    • Peel off the piece of metal that is glued to hold the two halves of the base together.

    • You may need rubber cement to reapply the piece of metal when reassembling the device.

    번역하기

  4. Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal: 3 단계, 이미지 1/2 Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal: 3 단계, 이미지 2/2

    • Unscrew the four 10mm Phillips head screws on the bottom of the device.

    • Once the base is removed, the device should look as shown on the picture.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 8명과 함께

Nick Kaprielian

회원 가입일: 01/14/14

525 평판

안내서 4개 작성하였습니다

배지: 12

배지 +9개 더

팀

Cal Poly, Team 17-3, Forte Winter 2014 Cal Poly, Team 17-3, Forte Winter 2014 회원

CPSU-FORTE-W14S17G3

5 회원들

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 11

30일 전: 12

전체 시간: 560