주요 콘텐츠로 건너뛰기

Lite FX Rotating Big Ball of Lite Model 1929 Motor Replacement

필요한 것

  1. Lite FX Rotating Big Ball of Lite Model 1929 Motor Replacement, Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal: 1 단계, 이미지 1/1
    • Turn the device over so that the base is on top.

  2. Lite FX Rotating Big Ball of Lite Model 1929 Motor Replacement: 2 단계, 이미지 1/1
    • Peel off the piece of metal that is glued to hold the two halves of the base together.

    • You may need rubber cement to reapply the piece of metal when reassembling the device.

  3. Lite FX Rotating Big Ball of Lite Model 1929 Motor Replacement: 3 단계, 이미지 1/2 Lite FX Rotating Big Ball of Lite Model 1929 Motor Replacement: 3 단계, 이미지 2/2
    • Unscrew the four 10mm Phillips head screws on the bottom of the device.

    • Once the base is removed, the device should look as shown on the picture.

  4. Lite FX Rotating Big Ball of Lite Model 1929 Motor Replacement, Motor: 4 단계, 이미지 1/2 Lite FX Rotating Big Ball of Lite Model 1929 Motor Replacement, Motor: 4 단계, 이미지 2/2
    • Use a pair of tweezers to crush the sides of the wirenuts.

    • The wirenuts are crimped to lock the wires in place. Usually the wires are just twisted into them.

    • Pull all of the wires out of the wirenuts.

  5. Lite FX Rotating Big Ball of Lite Model 1929 Motor Replacement: 5 단계, 이미지 1/2 Lite FX Rotating Big Ball of Lite Model 1929 Motor Replacement: 5 단계, 이미지 2/2
    • Separate the wires that belong to the motor.

    • The wires should be small and black.

    • Remove the motor.

결론

To reassemble your device, follow these instructions in reverse order, starting from step five.

다른 2명이 해당 안내서를 완성하였습니다.

Courtney Elliott

회원 가입일: 01/14/14

375 평판

안내서 3개 작성하였습니다

Cal Poly, Team 17-3, Forte Winter 2014 Cal Poly, Team 17-3, Forte Winter 2014 회원

CPSU-FORTE-W14S17G3

5 회원들

안내서 7개 작성하였습니다

댓글 2개

Where can you find a replacement motor?

bellyjb - 답글

I can't find one either!!!!

Dallin - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 7

30일 전: 18

전체 시간: 2,674