소개

Will your groovy disco ball not turn on? This guide will teach you to remove and replace the switch so you can get back to your partying.

  1. Unplug the device to avoid injury. Use a Phillips head screwdriver to unscrew the single screw.
    • Unplug the device to avoid injury.

    • Use a Phillips head screwdriver to unscrew the single screw.

    • Hold on to the nut from the other side so you do not lose it.

    • Remove the panel that conceals the switch.

  2. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  3. Hold on to the red disc with needle nosed pliers, and use the Phillips head screwdriver to remove the disc by pushing down.
    • Hold on to the red disc with needle nosed pliers, and use the Phillips head screwdriver to remove the disc by pushing down.

  4. Remove and replace the white switch. Do not be afraid to pull as this takes a bit of force to remove.
    • Remove and replace the white switch.

    • Do not be afraid to pull as this takes a bit of force to remove.

결론

To reassemble your device, follow these instructions in reverse order.

Courtney Elliott

회원 가입일: 2014년 01월 14일

354 평판

안내서 3개 작성하였습니다

Cal Poly, Team 17-3, Forte Winter 2014 Cal Poly, Team 17-3, Forte Winter 2014 회원

CPSU-FORTE-W14S17G3

5 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 2

전체 시간: 465