Little Wonder 4 HP Honda Pro Edger 62320001 Rev B Blade Replacement - iFixit 수리 안내서

소개

Use this guide to remove or replace the blade on a Little Wonder 4 HP Honda Pro Edger 62320001 Rev B.

필요한 것

1 단계 Remove the blade nut

Little Wonder 4 HP Honda Pro Edger 62320001 Rev B Blade Replacement, Remove the blade nut: 1 단계, 이미지 1/1

Before you begin, make sure the edger is switched off and the red throttle adjuster is in the disengaged position. Disconnect the spark plug.
Use a 3/4 inch socket and ratchet to remove the nut securing the blade.
Brace the left side of the blade against the ground in order to loosen the nut. Brace the right side of the blade against the ground for tightening.

2 단계 Remove the blade washer

Little Wonder 4 HP Honda Pro Edger 62320001 Rev B Blade Replacement, Remove the blade washer: 2 단계, 이미지 1/1

Remove the blade washer.

3 단계 Remove the blade

Little Wonder 4 HP Honda Pro Edger 62320001 Rev B Blade Replacement, Remove the blade: 3 단계, 이미지 1/1

Remove the blade.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

Adam O'Camb

회원 가입일: 04/11/15

196,767 평판

안내서 416개 작성하였습니다

배지 +36개 더

댓글 0개

조회 통계:

24 시간 전: 2

7일 전: 23

30일 전: 79

전체 시간: 1,638