주요 콘텐츠로 건너뛰기

Logic Board Disconnection

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. Logic Board Disconnection, Disconnect the logic board: 1 단계, 이미지 1/2 Logic Board Disconnection, Disconnect the logic board: 1 단계, 이미지 2/2
    • Use a T3 Torx driver to remove the two 1.4 mm screws securing the trackpad connector bracket.

    • Remove the trackpad connector bracket.

  2. Logic Board Disconnection: 2 단계, 이미지 1/2 Logic Board Disconnection: 2 단계, 이미지 2/2
    • Use the flat end of a spudger to pry the trackpad cable connector up and out of its socket.

  3. Logic Board Disconnection: 3 단계, 이미지 1/3 Logic Board Disconnection: 3 단계, 이미지 2/3 Logic Board Disconnection: 3 단계, 이미지 3/3
    • If the left speaker is already disconnected, skip this step.

    • Slide the tip of a spudger underneath the left speaker cable and pry straight up to disconnect the speaker.

    • With the connector disconnected, slide the flat end of a spudger under the cable to separate the adhesive securing the cable to the logic board.

  4. Logic Board Disconnection: 4 단계, 이미지 1/2 Logic Board Disconnection: 4 단계, 이미지 2/2
    • Use a T3 Torx driver to remove the two 1.3 mm screws securing the USB-C port connector bracket.

    • Remove the USB-C connector bracket.

  5. Logic Board Disconnection: 5 단계, 이미지 1/2 Logic Board Disconnection: 5 단계, 이미지 2/2
    • Use the flat end of a spudger to pry the USB-C cable connector up and out of its socket on the logic board.

  6. Logic Board Disconnection: 6 단계, 이미지 1/3 Logic Board Disconnection: 6 단계, 이미지 2/3 Logic Board Disconnection: 6 단계, 이미지 3/3
    • Use a spudger to lift up the small locking flap on the sound board cable's ZIF connector.

    • Slide the sound board cable out of the ZIF connector.

  7. Logic Board Disconnection: 7 단계, 이미지 1/1
    • Peel back the black tape covering the fan cable connector.

  8. Logic Board Disconnection: 8 단계, 이미지 1/3 Logic Board Disconnection: 8 단계, 이미지 2/3 Logic Board Disconnection: 8 단계, 이미지 3/3
    • Use the tip of a spudger to lift up the locking flap on the fan cable's ZIF connector.

    • Slide the fan cable out of the ZIF connector.

  9. Logic Board Disconnection: 9 단계, 이미지 1/2 Logic Board Disconnection: 9 단계, 이미지 2/2
    • Use a T3 Torx driver to remove the two 1.4 mm screws securing the antenna cable bracket.

    • Remove the antenna cable bracket.

  10. Logic Board Disconnection: 10 단계, 이미지 1/3 Logic Board Disconnection: 10 단계, 이미지 2/3 Logic Board Disconnection: 10 단계, 이미지 3/3
    • Insert the point of a spudger under one of the antenna cables close to the connector. Pry straight up to disconnect the cable.

    • Repeat for the other antenna cable.

  11. Logic Board Disconnection: 11 단계, 이미지 1/2 Logic Board Disconnection: 11 단계, 이미지 2/2
    • Use a T3 Torx driver to remove the two 1.5 mm screws securing the display cable connector bracket.

    • Remove the display cable connector bracket.

  12. Logic Board Disconnection: 12 단계, 이미지 1/2 Logic Board Disconnection: 12 단계, 이미지 2/2
    • Use the flat end of a spudger to pry up the display cable connector.

결론

To reassemble your device, follow these instructions in reverse order.

Adam O'Camb

회원 가입일: 04/11/15

195,355 평판

안내서 416개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 115