Logitech G29 Driving Force Pedal Replacement - iFixit 수리 안내서

소개

This replacement is not bad other than the fact there are a ton of screws. With a little soldering knowledge and fixing knowledge this guide will take you through the steps needed to replace a pedal.

필요한 것

1 단계 Pedal

Logitech G29 Driving Force Pedal Replacement, Pedal: 1 단계, 이미지 1/1

Start by removing the 12 #1 Phillips that holds the pedals the the back board

2 단계

Logitech G29 Driving Force Pedal Replacement: 2 단계, 이미지 1/1

Next remove all 12 of the J0 Phillips

3 단계

Logitech G29 Driving Force Pedal Replacement: 3 단계, 이미지 1/1

For the last Couple screws remove the 2, 2.5 Allans located on the pedals.
I would suggest only taking the 2 Allans out of the pedal that needs fixing. All others can stay

4 단계

Logitech G29 Driving Force Pedal Replacement: 4 단계, 이미지 1/1

Now that all screws are loose the back plate should be able to be removed reviling the pedals.

5 단계

Logitech G29 Driving Force Pedal Replacement: 5 단계, 이미지 1/1

If pedal is unresponsive start by checking the gear mesh.
If gear mesh is not connecting check to make sure everything is tight.
If gears are stripped or broken off get replacement gears.

6 단계

Logitech G29 Driving Force Pedal Replacement: 6 단계, 이미지 1/1

If gears are fine check wire connections.
If red wires are loose resouder and make sure the connection is good.
If the black ground wire is loose, tighten up.
If none of these fix the problem go ahead and source a new pedal to install.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 1명과 함께

Brock Harris

회원 가입일: 09/16/22

287 평판

안내서 1개 작성함

배지 +6개 더

팀

Western Carolina University, Team 1-5, Virtue Fall 2022 Western Carolina University, Team 1-5, Virtue Fall 2022 회원

WCU-VIRTUE-F22S1G5

4 회원들

안내서 11개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 7

7일 전: 56

30일 전: 217

전체 시간: 3,510