기기를 수리하세요 커뮤니티 상점

Logitech G910 Lights Replacement

소개

Use this guide to replace the lights of your Logitech G910.

필요한 것

  1. Logitech G910 Lights Replacement, Lights: 1 단계, 이미지 1/1

    • Unplug the keyboard from the computer.

    편집

  2. Logitech G910 Lights Replacement: 2 단계, 이미지 1/1

    • Flip the keyboard and unscrew the 15 back screws. The screws in the palm rest must be unscrewed and the palm rest removed to access the 6 screws at the bottom of the keyboard. (There are 2 lengths of screws the shorter ones are for the palm rest) There are also 2 screws under the nonslip pads of the palm rest.

    편집

  4. Logitech G910 Lights Replacement: 3 단계, 이미지 1/1

    • Release the front part using a spudger or flat screwdriver to gently pry. Lift off carefully.

    편집

  5. Logitech G910 Lights Replacement, Lift the film: 4 단계, 이미지 1/2 Logitech G910 Lights Replacement, Lift the film: 4 단계, 이미지 2/2

    • Gently lift up the plastic film in the top right corner.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 5명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 7명과 함께

Nasser

회원 가입일: 01/23/18

214 평판

안내서 1개 작성함

배지: 5

배지 +2개 더

팀

Eastern Washington University, Team S2-G2, Munoz Winter 2018 Eastern Washington University, Team S2-G2, Munoz Winter 2018 회원

EWU-MUNOZ-W18S2G2

5 회원들

안내서 10개 작성하였습니다

댓글 3개

So what do I do after I take apart my keyboard?

CuddlyZebesian - 답글

this guide is currently missing some steps. If you have figured it out, pls edit this guide.

tayola -

Desolder and replace LEDs the size of a grain of sand xD
This is definitely not a job I'd mark as "easy".

squallloire -

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 25

30일 전: 95

전체 시간: 6,064