기기를 수리하세요 커뮤니티 상점

Logitech G920 Driving Force Back Pedals Replacement

소개

This replacement guide will help you in replacing a faulty or broken back pedal on the Logitech G920 Driving Force. The following steps can be used for any of the three pedals that need to be replaced.

필요한 것

  1. Logitech G920 Driving Force Back Pedals Replacement, Back Pedals: 1 단계, 이미지 1/1

    • Locate the pedal you need to replace.

    번역하기

  2. Logitech G920 Driving Force Back Pedals Replacement: 2 단계, 이미지 1/1

    • Use a Hex 2.5 screwdriver or Allen key to remove the two 30 mm center screws in the pedal.

    번역하기

  3. Logitech G920 Driving Force Back Pedals Replacement: 3 단계, 이미지 1/1

    • Remove the pedals from their stand.

    • Repeat steps 2-3 until all pedals needing replacement are removed.

    번역하기

  4. Logitech G920 Driving Force Back Pedals Replacement: 4 단계, 이미지 1/2 Logitech G920 Driving Force Back Pedals Replacement: 4 단계, 이미지 2/2

    • Remove the 12 12mm screws from the bottom of the device using a Phillips #1 screwdriver.

    번역하기

  6. Logitech G920 Driving Force Back Pedals Replacement: 5 단계, 이미지 1/1

    • Remove the eight 12 mm screws from the bottom of the device with a Phillips #0 screwdriver.

    번역하기

  7. Logitech G920 Driving Force Back Pedals Replacement: 6 단계, 이미지 1/3 Logitech G920 Driving Force Back Pedals Replacement: 6 단계, 이미지 2/3 Logitech G920 Driving Force Back Pedals Replacement: 6 단계, 이미지 3/3

    • Push down the switch found in the hole at the top of the underside of the pedal board.

    • This opens the carpet-hold to access more screws.

    번역하기

  8. Logitech G920 Driving Force Back Pedals Replacement: 7 단계, 이미지 1/1

    • Remove the two 14 mm screws behind the carpet hold with a Phillips #0 screwdriver.

    번역하기

  9. Logitech G920 Driving Force Back Pedals Replacement: 8 단계, 이미지 1/2 Logitech G920 Driving Force Back Pedals Replacement: 8 단계, 이미지 2/2

    • Remove the pedal back that matches the pedal front removed in step 3 .

    • This image is not upside down. When removing the back panel piece, the lettering on the inner pedal mechanism will appear this way.

    번역하기

  10. Logitech G920 Driving Force Back Pedals Replacement: 9 단계, 이미지 1/2 Logitech G920 Driving Force Back Pedals Replacement: 9 단계, 이미지 2/2

    • Remove the washer and bolt at the top of the red piece on the pedal back.

    번역하기

  11. Logitech G920 Driving Force Back Pedals Replacement: 10 단계, 이미지 1/3 Logitech G920 Driving Force Back Pedals Replacement: 10 단계, 이미지 2/3 Logitech G920 Driving Force Back Pedals Replacement: 10 단계, 이미지 3/3

    • Remove the red piece, spring, and block within the pedal back.

    • Replace the necessary part.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 5명과 함께

Aiden Muse

회원 가입일: 09/12/23

477 평판

안내서 3개 작성하였습니다

배지: 7

배지 +4개 더

팀

University of North Texas, Team 2-1, Harold Fall 2023 University of North Texas, Team 2-1, Harold Fall 2023 회원

UNT-HAROLD-F23S2G1

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 3

7일 전: 21

30일 전: 94

전체 시간: 463