Logitech UE Boom 3 Power Button Control Board Replacement - iFixit 수리 안내서

소개

In this guide you will replace the power button control board in a Logitech UE Boom 3 speaker. The model number is S-00171. Alternative model numbers could be S-00171-A, S-00171-B, and S-00171-C. This board is connected to the power button and is what makes the button turn the speaker on and off. If your power button is not working properly, you may need to replace the control board.

필요한 것

1 단계 Lid

Logitech UE Boom 3 Power Button Control Board Replacement, Lid: 1 단계, 이미지 1/2

Logitech UE Boom 3 Power Button Control Board Replacement, Lid: 1 단계, 이미지 2/2

Insert a Jimmy into the space between the body and the lid.
Wiggle the Jimmy to loosen the lid. Continue around the lid until lid comes off.
This may require a lot of force to open.

2 단계 Power Button Control Board

Logitech UE Boom 3 Power Button Control Board Replacement, Power Button Control Board: 2 단계, 이미지 1/3

Logitech UE Boom 3 Power Button Control Board Replacement, Power Button Control Board: 2 단계, 이미지 2/3

Logitech UE Boom 3 Power Button Control Board Replacement, Power Button Control Board: 2 단계, 이미지 3/3

Remove the four screws from the power button control board using a Phillips #00 screwdriver.
Remove the power button control board from the lid.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Ethan Donahue

회원 가입일: 03/18/24

579 평판

안내서 6개 작성하였습니다

+1개 배지 추가

팀

UMass Dartmouth, Team 1-4, Konn Spring 2024 UMass Dartmouth, Team 1-4, Konn Spring 2024 회원

UMASSD-KONN-S24S1G4

4 회원들

안내서 6개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 8

30일 전: 8

전체 시간: 24