기기를 수리하세요 커뮤니티 상점

Logitech VX Nano Wireless Mouse Opening Procedure

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

소개

Prerequisite only guide to open the Logitech VX Nano Wireless Mouse.

필요한 것

  1. Logitech VX Nano Wireless Mouse Opening Procedure, Remove batteries and nano receiver: 1 단계, 이미지 1/2 Logitech VX Nano Wireless Mouse Opening Procedure, Remove batteries and nano receiver: 1 단계, 이미지 2/2

    • Pull down on the battery release tab to remove the battery cover.

    • Remove battery cover.

    편집

  2. Logitech VX Nano Wireless Mouse Opening Procedure: 2 단계, 이미지 1/2 Logitech VX Nano Wireless Mouse Opening Procedure: 2 단계, 이미지 2/2

    • Pull the battery release tab away from the mouse so the two AA batteries come out.

    편집

  3. Logitech VX Nano Wireless Mouse Opening Procedure: 3 단계, 이미지 1/1

    • If the Nano Receiver is still in the mouse and not in your computer, remove it by pushing on the bright orange button. It should pop right out!

    편집

  5. Logitech VX Nano Wireless Mouse Opening Procedure, Open the mouse: 4 단계, 이미지 1/1

    • Find and remove the screws at the bottom of the battery compartment:

    • Two 6 mm Phillips #1 screws

    • When removing these two screws, it can be helpful to hold the plastic battery tab out of the way of your screwdriver.

    편집

  6. Logitech VX Nano Wireless Mouse Opening Procedure: 5 단계, 이미지 1/2 Logitech VX Nano Wireless Mouse Opening Procedure: 5 단계, 이미지 2/2

    • Use an opening pick to get underneath the corner of one of the adhesive skates.

    • As you start to remove the skate, make sure that the opening pick is underneath the entire adhesive pad—otherwise you run the risk of splitting the pad in half.

    • Continue to push the opening pick between the adhesive and the mouse case, slowly working the adhesive away from the case.

    • Repeat this same process for the two other skates.

    • Remove any old adhesive residue before applying new mouse skates.

    편집

  7. Logitech VX Nano Wireless Mouse Opening Procedure: 6 단계, 이미지 1/1

    • Remove the screws from the backside of the mouse:

    • Three 6 mm Phillips #1 screws

    • The top shell and bottom case are no longer connected. Keep the mouse steady so you can carefully remove the upper shell in the next step.

    편집

  8. Logitech VX Nano Wireless Mouse Opening Procedure: 7 단계, 이미지 1/2 Logitech VX Nano Wireless Mouse Opening Procedure: 7 단계, 이미지 2/2

    • Carefully separate the top plastic shell from the bottom case.

    • Remove the top shell.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

Carsten Frauenheim

회원 가입일: 03/10/20

114,581 평판

안내서 339개 작성하였습니다

배지: 40

배지 +37개 더

팀

iFixit iFixit 회원

Staff

136 회원들

안내서 17,299개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 10

전체 시간: 48