주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

This guide will provide a step-by-step process on how to safely remove and replace a light bulb for a Ben-Q projector. In the process of this removal, it will be demonstrated how to clean the area of any dust and how to recycle the waste material- old light bulb.

부품

지정된 부품이 없습니다.

  1. Unplug the projector from the wall outlet to allow for the light bulb to cool for at least 30 minutes.
    • Unplug the projector from the wall outlet to allow for the light bulb to cool for at least 30 minutes.

  2. On the bottom side of the projector, locate and unscrew the back cover using a Philip's head screwdriver.
    • On the bottom side of the projector, locate and unscrew the back cover using a Philip's head screwdriver.

  3. Unscrew the bulb screws on either side of the silver plate.
    • Unscrew the bulb screws on either side of the silver plate.

  4. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  5. Remove the light bulb from the projector by lifting the silver handle and pulling up.
    • Remove the light bulb from the projector by lifting the silver handle and pulling up.

  6. Clean the now vacant area where the light bulb once belonged of dust and particles using a Q-tip.
    • Clean the now vacant area where the light bulb once belonged of dust and particles using a Q-tip.

  7. Use a new Q-tip to clean the fan blades and hole in which the light enters.
    • Use a new Q-tip to clean the fan blades and hole in which the light enters.

  8. Open and remove the new light bulb from its box with clean hands to prevent from getting the bulb dirty.
    • Open and remove the new light bulb from its box with clean hands to prevent from getting the bulb dirty.

  9. Place the new bulb inside making sure to align the bulb towards the light hole and the wire connector towards the wire receiver.
    • Place the new bulb inside making sure to align the bulb towards the light hole and the wire connector towards the wire receiver.

  10. Dispose of the bulb by sending it to a recycling center.
    • Dispose of the bulb by sending it to a recycling center.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Desiree Benitez

회원 가입일: 2017년 01월 21일

128 평판

안내서 1개 작성함

USF Sarasota-Manatee, Team 1-1, Stewart Spring 2017 USF Sarasota-Manatee, Team 1-1, Stewart Spring 2017 회원

USFSM-STEWART-S17S1G1

19 회원들

안내서 16개 작성하였습니다

Thanks for your guide provide a step-by-step process on how to safely remove and replace a light bulb for a Ben-Q projector , how to projector Epson, is it same? because i have rental LCD Projector, definitely one day need

ericserianto - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 469