M3D Micro Frame Removal

소개

This guide serves as a prerequisite guide for replacing the z axis motor, the motors and ports. It shows how to remove the frame so these parts can be replaced.

1 단계 M3D Micro Frame Removal

M3D Micro Frame Removal, M3D Micro Frame Removal: 1 단계, 이미지 1/1

Removing the frame is necessary to access the z axis belt, motors and ports. Make sure the unit is unplugged and set on a hard level surface.

번역하기

2 단계

Pull the x-rods away from the plastic sliders on the y-rods, and flip the slider upwards to release the tracks. Lift the extruder assembly out of the way.

번역하기

3 단계

No tools are required to remove the frame. Press down on the printing bed with your thumbs while lifting the frame with your fingers. The frame easily slides up.

번역하기