주요 콘텐츠로 건너뛰기

MSI GP60 2PE Leopard Wireless Card Replacement

필요한 것

  1. MSI GP60 2PE Leopard Wireless Card Replacement, Battery: 1 단계, 이미지 1/1
    • Flip MSI GP60 2PE Leopard, so that the back is facing up.

  2. MSI GP60 2PE Leopard Wireless Card Replacement: 2 단계, 이미지 1/1
    • Find the unlock tab located on the upper right side of the device, then slide it to the right.

  3. MSI GP60 2PE Leopard Wireless Card Replacement: 3 단계, 이미지 1/3 MSI GP60 2PE Leopard Wireless Card Replacement: 3 단계, 이미지 2/3 MSI GP60 2PE Leopard Wireless Card Replacement: 3 단계, 이미지 3/3
    • Slide and hold the release tab on the left side of the battery, so that you can remove the battery.

  4. MSI GP60 2PE Leopard Wireless Card Replacement: 4 단계, 이미지 1/3 MSI GP60 2PE Leopard Wireless Card Replacement: 4 단계, 이미지 2/3 MSI GP60 2PE Leopard Wireless Card Replacement: 4 단계, 이미지 3/3
    • While holding the release tab, remove the battery slowly.

  5. MSI GP60 2PE Leopard Wireless Card Replacement, Back Panel: 5 단계, 이미지 1/1
    • Flip the device over so the back is facing up.

  6. MSI GP60 2PE Leopard Wireless Card Replacement: 6 단계, 이미지 1/2 MSI GP60 2PE Leopard Wireless Card Replacement: 6 단계, 이미지 2/2
    • Remove the four 5mm screws from the back of the device using a Phillips #00 screwdriver.

    • There is a screw located under the battery; lift the battery up to access it.

  7. MSI GP60 2PE Leopard Wireless Card Replacement: 7 단계, 이미지 1/2 MSI GP60 2PE Leopard Wireless Card Replacement: 7 단계, 이미지 2/2
    • Once all four screws are removed, lift the back off.

  8. MSI GP60 2PE Leopard Wireless Card Replacement, Wireless Card: 8 단계, 이미지 1/1
    • Locate the wireless card.

  9. MSI GP60 2PE Leopard Wireless Card Replacement: 9 단계, 이미지 1/1
    • Using a Phillips #00 screwdriver, remove the one 2 mm screw that is holding the wireless card in place.

  10. MSI GP60 2PE Leopard Wireless Card Replacement: 10 단계, 이미지 1/1
    • Carefully remove the wireless card.

    • Pay close attention to the two wires attached to wireless card.

  11. MSI GP60 2PE Leopard Wireless Card Replacement: 11 단계, 이미지 1/2 MSI GP60 2PE Leopard Wireless Card Replacement: 11 단계, 이미지 2/2
    • Remove the wires connecting to the wireless card by pinching around the base where they connect, then carefully disconnect them.

    • The wires should come off fairly easily.

    • Avoid yanking or pulling too hard. This can result in the wires breaking.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Zoey Calcagno

회원 가입일: 10/04/18

672 평판

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 13

전체 시간: 1,313