메인 콘텐츠로 스킵하기

소개

SSD/Hard Drive are both crucial components to insure your computer system is able to save important data and memory. A SSD or Hard Drive can be corrupted or also can be in need of a upgrade. To improve these parts new cards must be installed.

부품

지정된 부품이 없습니다.

  1. Remove the four rear screws using the Phillips #0 screwdriver from the laptop as shown. The screws are 0.5 inches long.
    • Remove the four rear screws using the Phillips #0 screwdriver from the laptop as shown. The screws are 0.5 inches long.

  2. Using the black nylon spudger, carefully remove the rear cover from the laptop. Using the black nylon spudger, carefully remove the rear cover from the laptop.
    • Using the black nylon spudger, carefully remove the rear cover from the laptop.

  3. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  4. Carefully unplug the battery and remove it from the laptop. This will be held down with adhesive, but can be safely removed once unplugged. Carefully unplug the battery and remove it from the laptop. This will be held down with adhesive, but can be safely removed once unplugged. Carefully unplug the battery and remove it from the laptop. This will be held down with adhesive, but can be safely removed once unplugged.
    • Carefully unplug the battery and remove it from the laptop. This will be held down with adhesive, but can be safely removed once unplugged.

  5. Using the Phillips #0 screwdriver, remove each screw from the heatsink and remove it. Using the Phillips #0 screwdriver, remove each screw from the heatsink and remove it.
    • Using the Phillips #0 screwdriver, remove each screw from the heatsink and remove it.

  6. Using the Phillips #0 screwdriver, remove each screw from the SSD card units, then unplug and remove them. The screws are 0.25 inches long. Using the Phillips #0 screwdriver, remove each screw from the SSD card units, then unplug and remove them. The screws are 0.25 inches long. Using the Phillips #0 screwdriver, remove each screw from the SSD card units, then unplug and remove them. The screws are 0.25 inches long.
    • Using the Phillips #0 screwdriver, remove each screw from the SSD card units, then unplug and remove them. The screws are 0.25 inches long.

  7. Remove all screws from the back of the hard drive using the Phillips #0 screwdriver, then lift up and unplug the unit. Screws are 0.15625 inches long. Remove all screws from the back of the hard drive using the Phillips #0 screwdriver, then lift up and unplug the unit. Screws are 0.15625 inches long.
    • Remove all screws from the back of the hard drive using the Phillips #0 screwdriver, then lift up and unplug the unit. Screws are 0.15625 inches long.

결론

To reassemble your device, follow these instructions in reverse order.

Alex Wester

회원 가입일: 2018년 08월 31일

403 평판

안내서 3개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 2

지난 7일: 5

지난 30일: 28

전체 시간: 180