기기를 수리하세요 커뮤니티 상점

Mac Pro Late 2013 Interconnect Board Replacement

소개

The interconnect board hosts connections to the logic board, IO board, and both GPUs. Use this guide to remove and replace the interconnect board.

필요한 것

  1. Mac Pro Late 2013 Interconnect Board Replacement, Outer Case: 1 단계, 이미지 1/2 Mac Pro Late 2013 Interconnect Board Replacement, Outer Case: 1 단계, 이미지 2/2

    • Slide the lock switch to the right, to the unlocked position.

    번역하기

  2. Mac Pro Late 2013 Interconnect Board Replacement: 2 단계, 이미지 1/3 Mac Pro Late 2013 Interconnect Board Replacement: 2 단계, 이미지 2/3 Mac Pro Late 2013 Interconnect Board Replacement: 2 단계, 이미지 3/3

    • Lift the outer case straight up off the Mac Pro.

    • It may help to push down on the center of the fan while lifting the case up.

    번역하기

  3. Mac Pro Late 2013 Interconnect Board Replacement, Fan Assembly: 3 단계, 이미지 1/3 Mac Pro Late 2013 Interconnect Board Replacement, Fan Assembly: 3 단계, 이미지 2/3 Mac Pro Late 2013 Interconnect Board Replacement, Fan Assembly: 3 단계, 이미지 3/3

    • Remove five 5.1 mm T10 Torx screws from around the outer perimeter of the fan assembly.

    번역하기

  4. Mac Pro Late 2013 Interconnect Board Replacement: 4 단계, 이미지 1/2 Mac Pro Late 2013 Interconnect Board Replacement: 4 단계, 이미지 2/2

    • The fan assembly is attached to the rest of the computer by two cables on the IO board side.

    • Tilt the assembly up away from the IO board.

    • Do not try to remove the fan assembly yet, as it is still attached by two cables.

    번역하기

  5. Mac Pro Late 2013 Interconnect Board Replacement: 5 단계, 이미지 1/1

    • While supporting the fan assembly with one hand, loosen the two T8 captive screws in the fan cable bracket.

    • These screws are captive in the Mac Pro. Do not try to remove these screws from your Mac Pro.

    번역하기

  6. Mac Pro Late 2013 Interconnect Board Replacement: 6 단계, 이미지 1/1

    • Use a pair of tweezers to pull the fan cable bracket away from the fan assembly.

    번역하기

  8. Mac Pro Late 2013 Interconnect Board Replacement: 7 단계, 이미지 1/2 Mac Pro Late 2013 Interconnect Board Replacement: 7 단계, 이미지 2/2

    • Use the flat end of a spudger to disconnect the fan assembly ribbon cable from the IO board.

    번역하기

  9. Mac Pro Late 2013 Interconnect Board Replacement: 8 단계, 이미지 1/1

    • Disconnect the fan assembly antenna cable from the IO board.

    • Remove the fan assembly from the Mac Pro.

    번역하기

  10. Mac Pro Late 2013 Interconnect Board Replacement, Lower Case: 9 단계, 이미지 1/3 Mac Pro Late 2013 Interconnect Board Replacement, Lower Case: 9 단계, 이미지 2/3 Mac Pro Late 2013 Interconnect Board Replacement, Lower Case: 9 단계, 이미지 3/3

    • Flip the Mac Pro upside down, 180 degrees.

    • Remove five 5.1 mm T10 Torx screws from the outer perimeter of the lower case.

    번역하기

  11. Mac Pro Late 2013 Interconnect Board Replacement: 10 단계, 이미지 1/2 Mac Pro Late 2013 Interconnect Board Replacement: 10 단계, 이미지 2/2

    • Carefully lift the lower case up and remove it from the Mac Pro.

    번역하기

  12. Mac Pro Late 2013 Interconnect Board Replacement, Interconnect Board: 11 단계, 이미지 1/2 Mac Pro Late 2013 Interconnect Board Replacement, Interconnect Board: 11 단계, 이미지 2/2

    • Use the flat end of a spudger and a twisting motion to gently separate one side of the graphics card data connection.

    번역하기

  13. Mac Pro Late 2013 Interconnect Board Replacement: 12 단계, 이미지 1/3 Mac Pro Late 2013 Interconnect Board Replacement: 12 단계, 이미지 2/3 Mac Pro Late 2013 Interconnect Board Replacement: 12 단계, 이미지 3/3

    • Gently separate the other side as well.

    • Flip the connector up and out of the way of the graphics card.

    • Repeat this procedure on the other graphics card.

    번역하기

  14. Mac Pro Late 2013 Interconnect Board Replacement: 13 단계, 이미지 1/1

    • Remove the two 6.0 mm T7 Torx screws securing the interconnect board to the heat sink.

    번역하기

  15. Mac Pro Late 2013 Interconnect Board Replacement: 14 단계, 이미지 1/3 Mac Pro Late 2013 Interconnect Board Replacement: 14 단계, 이미지 2/3 Mac Pro Late 2013 Interconnect Board Replacement: 14 단계, 이미지 3/3

    • Gently walk the interconnect board straight up off the logic board's slot connection.

    • It is recommended to lift one side and then the other.

    • Do not try to remove the interconnect board from the Mac Pro yet, as it is still connected to the IO board.

    번역하기

  16. Mac Pro Late 2013 Interconnect Board Replacement: 15 단계, 이미지 1/2 Mac Pro Late 2013 Interconnect Board Replacement: 15 단계, 이미지 2/2

    • Flip the interconnect board up and over, exposing the IO board data cable.

    • Use the same sort of twisting and spreading motion with the flat end of a spudger to separate one side of the IO board data cable.

    번역하기

  17. Mac Pro Late 2013 Interconnect Board Replacement: 16 단계, 이미지 1/2 Mac Pro Late 2013 Interconnect Board Replacement: 16 단계, 이미지 2/2

    • Use the flat end of a spudger to separate the other side of the IO board data cable.

    • Bend the cable out of the way and remove the interconnect board from the Mac Pro.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 7명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Andrew Optimus Goldheart

회원 가입일: 10/17/09

502,710 평판

안내서 407개 작성하였습니다

배지: 44

배지 +41개 더

팀

iFixit iFixit 회원

Staff

135 회원들

안내서 16,731개 작성하였습니다

댓글 4개

Why is it necessary to remove the fan?

johnsburdett - 답글

Hola necesito comprar esta placa de interconexión, donde puedo encontrarla? Saludos

RailabMac - 답글

excellent, thank you very much, I wanted to ask you where I can get this plate, what is the reference?

Asdrubal - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 5

30일 전: 48

전체 시간: 5,462