주요 콘텐츠로 건너뛰기

Mac mini Model A1283 Logic Board Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. Mac mini Model A1283 Logic Board Replacement, Logic Board: 1 단계, 이미지 1/1
    • Use the flat end of a spudger to pry the power button cable connector up off the logic board.

  2. Mac mini Model A1283 Logic Board Replacement: 2 단계, 이미지 1/1
    • Use the flat end of a spudger to pry the sleep light cable connector up off the logic board.

    • During reassembly, make sure the cable does not come near the lug on the bottom case (shown in green) to avoid damaging the cable.

  3. Mac mini Model A1283 Logic Board Replacement: 3 단계, 이미지 1/1
    • Remove the single T10 Torx lug next to the RAM sockets on the logic board.

  4. Mac mini Model A1283 Logic Board Replacement: 4 단계, 이미지 1/1
    • Use a spudger to lift the free end of the logic board off the bottom housing near the PRAM battery.

  5. Mac mini Model A1283 Logic Board Replacement: 5 단계, 이미지 1/1
    • While slightly lifting the free end of the board pull it away from the port side of the mini, minding any edges that may get caught.

결론

To reassemble your device, follow these instructions in reverse order.

Walter Galan

693,920 평판

안내서 1,203개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 1,771