기기를 수리하세요 커뮤니티 상점

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

MacBook Air 11" Mid 2013 Logic Board Assembly Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

소개

Prereq to remove the logic board.

필요한 것

  1. MacBook Air 11" Mid 2013 Logic Board Assembly Replacement, Logic Board Assembly: 1 단계, 이미지 1/3 MacBook Air 11" Mid 2013 Logic Board Assembly Replacement, Logic Board Assembly: 1 단계, 이미지 2/3 MacBook Air 11" Mid 2013 Logic Board Assembly Replacement, Logic Board Assembly: 1 단계, 이미지 3/3

    • Use the flat end of a spudger to pry both antenna connectors up from their sockets on the AirPort/Bluetooth card, and move them out of the way.

    번역하기

  2. MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 2 단계, 이미지 1/1

    • Remove the following five screws securing the battery to the upper case:

    • Two 5.2 mm T5 Torx screws

    • One 6 mm T5 Torx screw

    • Two 2.6 mm T5 Torx screws

    번역하기

  3. MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 3 단계, 이미지 1/1

    • When handling the battery, avoid squeezing or touching the six exposed lithium polymer cells.

    • Lift the battery from its edge nearest the logic board and remove it from the upper case.

    번역하기

  4. MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 4 단계, 이미지 1/2 MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 4 단계, 이미지 2/2

    • Disconnect the I/O board by pulling the power cable away from its socket on the logic board.

    • Pull the cable parallel to the face of the logic board toward the front edge of the Air.

    번역하기

  5. MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 5 단계, 이미지 1/3 MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 5 단계, 이미지 2/3 MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 5 단계, 이미지 3/3

    • Use the tip of a spudger to de-route the antenna cables from their notches in the logic board.

    번역하기

  7. MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 6 단계, 이미지 1/3 MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 6 단계, 이미지 2/3 MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 6 단계, 이미지 3/3

    • Gently push the tip of a spudger under the black plastic flap stuck to the display data cable lock to make the lock pop upward and away from the socket.

    • While holding the lock away from the socket, gently pull the display data cable out of its socket.

    • Do not pull upward on the display data cable as you disconnect it, as its socket may break off the logic board.

    번역하기

  8. MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 7 단계, 이미지 1/3 MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 7 단계, 이미지 2/3 MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 7 단계, 이미지 3/3

    • Use the tip of a spudger to pry under the speaker cable connector, lifting it straight up from its socket.

    • De-route the cable from its notch in the logic board.

    번역하기

  9. MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 8 단계, 이미지 1/3 MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 8 단계, 이미지 2/3 MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 8 단계, 이미지 3/3

    • Use the tip of a spudger or your fingernail to flip up the retaining flap on the trackpad ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself.

    • Pull the trackpad ribbon cable straight out of its socket toward the front edge of the Air.

    번역하기

  10. MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 9 단계, 이미지 1/3 MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 9 단계, 이미지 2/3 MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 9 단계, 이미지 3/3

    • Use the tip of a spudger to flip up the retaining flap on the keyboard backlight ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself.

    • Pull the keyboard backlight ribbon cable out of its socket.

    번역하기

  11. MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 10 단계, 이미지 1/1

    • Remove the single 2.9 mm T5 Torx screw securing the AirPort/Bluetooth card to the logic board.

    번역하기

  12. MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 11 단계, 이미지 1/3 MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 11 단계, 이미지 2/3 MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 11 단계, 이미지 3/3

    • Slightly lift the free end of the AirPort/Bluetooth board and pull it out of its socket on the logic board.

    • To avoid damaging its socket on the logic board, do not excessively lift the free end of the AirPort/Bluetooth card.

    번역하기

  13. MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 12 단계, 이미지 1/1

    • Remove the three 3.6 mm T5 Torx screws securing the logic board to the upper case.

    • In some models these are 3.1 mm T5 Torx screws.

    번역하기

  14. MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 13 단계, 이미지 1/3 MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 13 단계, 이미지 2/3 MacBook Air 11" Mid 2013 Logic Board Assembly Replacement: 13 단계, 이미지 3/3

    • Gently lift the logic board assembly from the heat sink end and pull it away from the port side of the case to remove it from the Air.

    • When replacing the logic board, insert the board's rubber edge under the port-side rubber gasket, then lower the board into place.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 5명과 함께

Sam Goldheart

회원 가입일: 10/18/12

465,762 평판

안내서 538개 작성하였습니다

배지: 48

배지 +45개 더

팀

iFixit iFixit 회원

Staff

135 회원들

안내서 16,817개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 122