기기를 수리하세요 커뮤니티 상점

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

MacBook Core Duo LCD Assembly Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

소개

Internal Prerequisite.

필요한 것

  1. MacBook Core Duo LCD Assembly Replacement, LCD Assembly: 1 단계, 이미지 1/2 MacBook Core Duo LCD Assembly Replacement, LCD Assembly: 1 단계, 이미지 2/2

    • Remove the small piece of foam tape stuck down above each of the bezel covers.

    번역하기

  2. MacBook Core Duo LCD Assembly Replacement: 2 단계, 이미지 1/2 MacBook Core Duo LCD Assembly Replacement: 2 단계, 이미지 2/2

    • Use a spudger to slide the left bezel cover towards the LCD panel.

    • Do not lift up vertically on the cover! Unlike the large display bezel, this one has horizontal hooks to keep it in place. These will break easily.

    • Lift the left bezel cover off the display assembly.

    번역하기

  3. MacBook Core Duo LCD Assembly Replacement: 3 단계, 이미지 1/2 MacBook Core Duo LCD Assembly Replacement: 3 단계, 이미지 2/2

    • Use a spudger to slide the right bezel cover toward the LCD panel.

    • Lift the right bezel cover off the display assembly.

    번역하기

  5. MacBook Core Duo LCD Assembly Replacement: 4 단계, 이미지 1/2 MacBook Core Duo LCD Assembly Replacement: 4 단계, 이미지 2/2

    • Lift the inverter out of the display slightly and disconnect the backlight cable from its right side.

    • Place the inverter back down in its recess.

    번역하기

  6. MacBook Core Duo LCD Assembly Replacement: 5 단계, 이미지 1/1

    • Remove the single 3.2 mm Phillips screw securing the display data cable to the right clutch hinge.

    번역하기

  7. MacBook Core Duo LCD Assembly Replacement: 6 단계, 이미지 1/1

    • Move the display data cable out from under the mounting arm of the right clutch hinge.

    번역하기

  8. MacBook Core Duo LCD Assembly Replacement: 7 단계, 이미지 1/1

    • Remove the twelve 4.2 mm Phillips screws securing the LCD assembly to the rear display bezel.

    • Make sure you pay attention to how the microphone cable (and antenna cable on some models) are routed around the outside of the two screws nearest to the bottom of the screen (on both left and right). It's easy to damage the cables if not routed properly when putting these screws back on.

    번역하기

  9. MacBook Core Duo LCD Assembly Replacement: 8 단계, 이미지 1/1

    • Lift the LCD assembly out of the rear display bezel, minding any cables that may get caught.

    번역하기

  10. MacBook Core Duo LCD Assembly Replacement: 9 단계, 이미지 1/1

    • Be sure to keep track of the small magnet along the left side of the display. It may be stuck to the LCD frames or to the rear display bezel. When installing it, be sure short side is facing upward.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 6명과 함께

Andrew Bookholt

586,468 평판

안내서 619개 작성하였습니다

배지: 47

배지 +44개 더

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 10

30일 전: 12

전체 시간: 457