기기를 수리하세요 커뮤니티 상점

MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

소개

Prereq only.

필요한 것

  1. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement, Battery Connector: 1 단계, 이미지 1/1

    • Remove the plastic cover adhered to the battery contact board.

    번역하기

  2. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: 2 단계, 이미지 1/1

    • Remove the following screws securing the battery connector board to the logic board:

    • Two 2.8 mm T6 Torx screws

    • One 7.0 mm T6 Torx shouldered screw

    번역하기

  4. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: 3 단계, 이미지 1/2 MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: 3 단계, 이미지 2/2

    • Use tweezers to remove the small plastic cover located near the bottom right of the battery connector board.

    번역하기

  5. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: 4 단계, 이미지 1/1

    • Remove the wide head 6.4 mm T6 Torx screw securing the battery connector to the logic board assembly.

    번역하기

  6. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: 5 단계, 이미지 1/2 MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: 5 단계, 이미지 2/2

    • Carefully lift the battery connector board up off the logic board.

    • It is recommended to bend the battery cables just slightly, to keep the board suspended up above the logic board and out of the way.

    • Do not fold the board completely over, or crease the cables, as this may damage the battery.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 4명과 함께

Walter Galan

694,561 평판

안내서 1,203개 작성하였습니다

배지: 54

배지 +51개 더

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 251