주요 콘텐츠로 건너뛰기

MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement, Logic Board Assembly: 1 단계, 이미지 1/2 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement, Logic Board Assembly: 1 단계, 이미지 2/2
    • Use the tip of a spudger to push the edges of the I/O board connector straight out of its socket on the logic board.

    • It is recommended to carefully push on both sides of the connector to "walk" it out of its socket.

  2. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 2 단계, 이미지 1/2 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 2 단계, 이미지 2/2
    • Use the tip of a spudger to push the iSight camera cable connector straight away from its socket on the logic board.

    • It is recommended to carefully push on both sides of the connector to "walk" it out of its socket.

  3. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 3 단계, 이미지 1/2 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 3 단계, 이미지 2/2
    • Move the iSight camera cable aside.

  4. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 4 단계, 이미지 1/2 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 4 단계, 이미지 2/2
    • Wedge the flat end of a spudger underneath the keyboard backlight connector and the logic board.

    • Gently twist the flat end of a spudger upwards to pry the keyboard backlight connector up off its socket on the logic board.

  5. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 5 단계, 이미지 1/2 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 5 단계, 이미지 2/2
    • Use the tip of a spudger to flip up the retaining flap on the trackpad ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself.

    • Grasp the plastic pull tab and pull the trackpad ribbon cable out of its socket.

  6. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 6 단계, 이미지 1/3 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 6 단계, 이미지 2/3 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 6 단계, 이미지 3/3
    • Use the tip of a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself.

    • Grasp the plastic pull tab and pull the keyboard ribbon cable out of its socket.

  7. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 7 단계, 이미지 1/3 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 7 단계, 이미지 2/3 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 7 단계, 이미지 3/3
    • Use the tip of a spudger to flip up the retaining flap on the microphone ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself.

    • Grasp the plastic pull tab and pull the microphone ribbon cable out of its socket.

  8. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 8 단계, 이미지 1/2 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 8 단계, 이미지 2/2
    • Use the tip of a spudger to rotate the pull tab secured to the display data cable lock toward the DC-In side of the computer.

  9. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 9 단계, 이미지 1/3 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 9 단계, 이미지 2/3 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 9 단계, 이미지 3/3
    • Gently push the edges of the display data cable connector away from its socket on the logic board.

    • It is recommended "walk" the connector out of its socket. Simply push the top and bottom corners of the connector and carefully "walk it out" of its socket.

    • Pull, but do not remove, the display data cable connector out of its socket and carefully move it out of the way.

  10. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 10 단계, 이미지 1/3 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 10 단계, 이미지 2/3 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 10 단계, 이미지 3/3
    • Use the tip of a spudger to flip up the retaining flap on the left fan ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself.

    • Carefully pull the left fan ribbon cable out of its socket.

  11. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 11 단계, 이미지 1/1
    • Move the left fan ribbon cable aside to reveal a hidden screw securing the logic board assembly to the upper case.

  12. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 12 단계, 이미지 1/2 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 12 단계, 이미지 2/2
    • Remove the following screws securing the logic board to the upper case:

    • Eight 3.3 mm T5 Torx screws

    • One Phillips #00 screw

    • Two 3.1 mm T5 Torx screws

    • Remove two more screws, from the MagSafe DC-In board in the upper right corner (second image).

    • Two 3.4 mm T5 Torx screws

  13. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 13 단계, 이미지 1/2 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 13 단계, 이미지 2/2
    • Carefully lift the logic board assembly from its left side and work it out of the upper case, minding any cables and the I/O ports that may get caught during removal.

    • Pull the right I/O port side of the logic board away from the side of the upper case and remove the logic board assembly.

결론

To reassemble your device, follow these instructions in reverse order.

Walter Galan

693,936 평판

안내서 1,203개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 100