기기를 수리하세요 커뮤니티 상점

MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

소개

Prereq only.

필요한 것

  1. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement, Logic Board Assembly: 1 단계, 이미지 1/3 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement, Logic Board Assembly: 1 단계, 이미지 2/3 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement, Logic Board Assembly: 1 단계, 이미지 3/3

    • Use the tip of a spudger to push the edges of the I/O board connector straight out of its socket on the logic board.

    • It is recommended to carefully push on both sides of the connector to "walk" it out of its socket.

    번역하기

  2. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 2 단계, 이미지 1/2 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 2 단계, 이미지 2/2

    • Wedge the flat end of a spudger underneath the keyboard backlight connector and the logic board.

    • Gently twist the flat end of a spudger upwards to pry the keyboard backlight connector up off its socket on the logic board.

    번역하기

  3. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 3 단계, 이미지 1/3 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 3 단계, 이미지 2/3 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 3 단계, 이미지 3/3

    • Grab the black pull tab secured to the display data cable lock and rotate it toward the DC-In side of the computer.

    • Pull the display data cable straight out of its socket on the logic board.

    • Do not lift up on the display data cable, as its socket is very fragile. Pull the cable parallel to the face of the logic board.

    번역하기

  4. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 4 단계, 이미지 1/1

    • Pry the headphone jack cable connector up off its socket on the logic board.

    번역하기

  6. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 5 단계, 이미지 1/3 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 5 단계, 이미지 2/3 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 5 단계, 이미지 3/3

    • Use the tip of a spudger to flip up the retaining flap on the microphone ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself.

    • Grasp the plastic pull tab and pull the microphone ribbon cable out of its socket.

    번역하기

  7. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 6 단계, 이미지 1/3 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 6 단계, 이미지 2/3 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 6 단계, 이미지 3/3

    • Use the flat edge of a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself.

    • Grasp the plastic pull tab and pull the keyboard ribbon cable out of its socket.

    번역하기

  8. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 7 단계, 이미지 1/3 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 7 단계, 이미지 2/3 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 7 단계, 이미지 3/3

    • Repeat the previous procedure to disconnect the Trackpad ribbon cable from its socket on the logic board.

    번역하기

  9. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 8 단계, 이미지 1/2 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 8 단계, 이미지 2/2

    • Wedge the flat end of a spudger beneath the right speaker cable connector.

    • Gently pry the right speaker cable connector up off from its socket on the logic board.

    • Be sure you are prying up on the connector, not the socket itself.

    번역하기

  10. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 9 단계, 이미지 1/1

    • Use the flat end of a spudger to pry the SSD cable connector up off its socket on the logic board.

    번역하기

  11. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 10 단계, 이미지 1/2 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 10 단계, 이미지 2/2

    • Wedge the tip of a spudger beneath the left speaker cable connector.

    • Gently pry the left speaker cable connector up off from its socket on the logic board.

    • Be sure you are prying up on the connector, not the socket itself.

    번역하기

  12. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 11 단계, 이미지 1/1

    • Remove the nine 3.3 mm T5 Torx screws securing the logic board and MagSafe DC-in board to the upper case.

    번역하기

  13. MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 12 단계, 이미지 1/2 MacBook Pro 13" Retina Display Late 2012 Logic Board Assembly Replacement: 12 단계, 이미지 2/2

    • Carefully grasp the corner of the logic board (opposite of the I/O ports) and lift the logic board out of the upper case.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Andrew Optimus Goldheart

회원 가입일: 10/17/09

503,085 평판

안내서 407개 작성하였습니다

배지: 44

배지 +41개 더

팀

iFixit iFixit 회원

Staff

136 회원들

안내서 17,299개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 8

전체 시간: 104