주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

소개

Prereq only.

  1. Use the flat end of a spudger to pry the SSD cable connector up from its socket on the logic board. Use the flat end of a spudger to pry the SSD cable connector up from its socket on the logic board.
    • Use the flat end of a spudger to pry the SSD cable connector up from its socket on the logic board.

  2. Use your thumb or finger to bend the plastic spring bar on the SSD tray, freeing the two clips at the front side of the device. While holding the spring bar depressed, tilt the SSD assembly up out of its cavity. While holding the spring bar depressed, tilt the SSD assembly up out of its cavity.
    • Use your thumb or finger to bend the plastic spring bar on the SSD tray, freeing the two clips at the front side of the device.

    • While holding the spring bar depressed, tilt the SSD assembly up out of its cavity.

  3. Nintendo Switch 키트

    게임으로 돌아가기 위한 빠른 해결책

    Nintendo Switch 키트 쇼핑하기

    Nintendo Switch 키트

    게임으로 돌아가기 위한 빠른 해결책

    Nintendo Switch 키트 쇼핑하기
  4. Remove the SSD assembly from the upper case.
    • Remove the SSD assembly from the upper case.

  5. Remove the single 2.9 mm T5 Torx screw securing the SSD to the SSD tray.
    • Remove the single 2.9 mm T5 Torx screw securing the SSD to the SSD tray.

  6. Insert the edge of plastic opening tool between the SSD and the SSD tray, opposite to the socket side of SSD tray. Pry the side of the SSD opposite the SSD tray socket out of the SSD tray.
    • Insert the edge of plastic opening tool between the SSD and the SSD tray, opposite to the socket side of SSD tray.

    • Pry the side of the SSD opposite the SSD tray socket out of the SSD tray.

    • Only lift the SSD up far enough to grab the sides of it with your fingers. Lifting it any more may damage the card or socket.

  7. Carefully pull the SSD straight out of its socket on the SSD tray. Carefully pull the SSD straight out of its socket on the SSD tray.
    • Carefully pull the SSD straight out of its socket on the SSD tray.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Walter Galan

636,129 평판

안내서 1,203개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 3

전체 시간: 82