주요 콘텐츠로 건너뛰기

MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement, Logic Board Assembly: 1 단계, 이미지 1/2 MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement, Logic Board Assembly: 1 단계, 이미지 2/2
    • Remove the two 2.1 mm T5 Torx screws securing the I/O board cable bracket to the logic board.

    • Remove the I/O board cable bracket.

  2. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 2 단계, 이미지 1/2 MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 2 단계, 이미지 2/2
    • Use the flat end of a spudger to pop the I/O board connector straight up off its socket on the logic board.

    • Be careful to only pry up on the I/O board cable, not on the socket itself or you risk damaging your logic board.

  3. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 3 단계, 이미지 1/2 MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 3 단계, 이미지 2/2
    • Lift the logic board end of the I/O board cable straight up to bend it out of the way.

    • To avoid damage to the cable, fold only at the bend in the I/O board end of the cable.

  4. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 4 단계, 이미지 1/2 MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 4 단계, 이미지 2/2
    • Use the tip of a spudger to lift the right speaker connector straight up out of its socket on the logic board.

  5. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 5 단계, 이미지 1/2 MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 5 단계, 이미지 2/2
    • With the tip of a spudger, push on either side of the I/O board connector to walk it out of its socket on the logic board.

  6. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 6 단계, 이미지 1/3 MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 6 단계, 이미지 2/3 MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 6 단계, 이미지 3/3
    • Use the flat end of a spudger to disconnect the keyboard backlight cable and bend it up out of the way of the logic board.

  7. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 7 단계, 이미지 1/3 MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 7 단계, 이미지 2/3 MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 7 단계, 이미지 3/3
    • Grab the black plastic tab to flip the display cable connector open and pull it straight out of its socket on the logic board.

  8. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 8 단계, 이미지 1/2 MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 8 단계, 이미지 2/2
    • Carefully pull the DC-In board connector straight out of its socket on the logic board.

  9. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 9 단계, 이미지 1/3 MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 9 단계, 이미지 2/3 MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 9 단계, 이미지 3/3
    • Wedge the flat end of a spudger under the left speaker cable near the connector and lift it straight up out of its socket and fold it out of the way.

  10. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 10 단계, 이미지 1/2 MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 10 단계, 이미지 2/2
    • If necessary, peel back any tape covering the microphone cable ZIF connector.

  11. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 11 단계, 이미지 1/3 MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 11 단계, 이미지 2/3 MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 11 단계, 이미지 3/3
    • Use the tip of a spudger to flip the retaining tab on the microphone cable ZIF connector.

    • Pull the microphone cable out of its socket on the logic board.

  12. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 12 단계, 이미지 1/3 MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 12 단계, 이미지 2/3 MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 12 단계, 이미지 3/3
    • If necessary, peel back any tape covering the keyboard cable connector.

    • Use the tip of a spudger to flip the retaining tab on the ZIF connector.

  13. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 13 단계, 이미지 1/2 MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 13 단계, 이미지 2/2
    • Pull the keyboard cable straight out of its ZIF socket on the logic board.

  14. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 14 단계, 이미지 1/3 MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 14 단계, 이미지 2/3 MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 14 단계, 이미지 3/3
    • If necessary, peel back any tape covering the trackpad cable connector.

    • Use the tip of a spudger to flip the retaining tab on the ZIF connector.

  15. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 15 단계, 이미지 1/2 MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 15 단계, 이미지 2/2
    • Pull the trackpad ribbon cable straight out of its socket on the logic board.

  16. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 16 단계, 이미지 1/1
    • Remove the five 3.5 mm T5 Torx screws securing the logic board to the upper case.

    • When reassembling, install all five screws loosely, position the logic board, and then tighten evenly.

  17. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 17 단계, 이미지 1/3 MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 17 단계, 이미지 2/3 MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: 17 단계, 이미지 3/3
    • Lift the processor end of the logic board up slightly and pull it toward the fan recess to free the ports from the edge of the upper case.

    • Remove the logic board.

    • When reinstalling, make sure the keyboard, keyboard backlight, MagSafe, and microphone cables don't get trapped beneath the logic board.

    • Also be sure to slide the ports' metal EMI fingers under the side of the case, not over.

결론

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

회원 가입일: 10/18/12

465,278 평판

안내서 538개 작성하였습니다

iFixit iFixit 회원

Staff

136 회원들

안내서 16,573개 작성하였습니다

댓글 한 개

Thanks for the the instructions. I have a question that I couldn’t find on the answers forums. Is there any thermal paste or just general cooling system considerations when replacing the logic board?

Brad Bowman - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 238