소개

Remove the lower case to access the internal components of your MacBook Pro.

  1. Remove the following ten screws:
    • Remove the following ten screws:

      • Three 14.4 mm Phillips #00 screws

      • Three 3.5 mm Phillips #00 screws

      • Four 3.5 mm shouldered Phillips #00 screws

      • When replacing the small screws, align them perpendicular to the slight curvature of the case (they don't go straight down).

  2. Use your fingers to pry the lower case away from the body of the MacBook near the vent.
    • Use your fingers to pry the lower case away from the body of the MacBook near the vent.

    • Remove the lower case.

결론

To reassemble your device, follow these instructions in reverse order.

다른 49명이 해당 안내서를 완성하였습니다.

Andrew Bookholt

505,724 평판

안내서 618개 작성하였습니다

Has anyone had problems with the screen flickering after assembling the computer again? How can I solve this problem?

Laura Christiansen - 답글

조회 통계:

지난 24시간: 4

지난 7일: 37

지난 30일: 146

전체 시간: 29,235