소개

Replace the lower case in your MacBook Pro 13" Unibody Mid 2010.

  1. Remove the following 10 screws securing the lower case to the MacBook Pro 13" Unibody:
    • Remove the following 10 screws securing the lower case to the MacBook Pro 13" Unibody:

    • Seven 3 mm Phillips screws.

    • Three 13.5 mm Phillips screws.

  2. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  3. Slightly lift the lower case and push it toward the rear of the computer to free the mounting tabs.
    • Slightly lift the lower case and push it toward the rear of the computer to free the mounting tabs.

결론

To reassemble your device, follow these instructions in reverse order.

다른 37명이 해당 안내서를 완성하였습니다.

Walter Galan

589,167 평판

안내서 1,203개 작성하였습니다

Those are actually not seven identical 3 mm screws. The screw located at the ventilation side next to the three 13.5 mm screws does not have a shaft as compared to the other six 3 mm screws.

glaubitz - 답글

How do you reattach the little black pads to the bottom of uni-body case?

Luke Morrison - 답글

댓글 쓰기

조회 통계:

지난 24시간: 4

지난 7일: 27

지난 30일: 143

전체 시간: 33,393