소개

Remove the lower case to access the internal components of your MacBook Pro.

  1. Remove the following ten screws:
    • Remove the following ten screws:

      • Three 14.4 mm Phillips #00 screws

      • Three 3.5 mm Phillips #00 screws

      • Four 3.5 mm shouldered Phillips #00 screws

      • When replacing the small screws, align them perpendicular to the slight curvature of the case (they don't go straight down).

  2. US$100.00 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  3. Use your fingers to pry the lower case away from the body of the MacBook near the vent. Remove the lower case.
    • Use your fingers to pry the lower case away from the body of the MacBook near the vent.

    • Remove the lower case.

결론

To reassemble your device, follow these instructions in reverse order.

다른 65명이 해당 안내서를 완성하였습니다.

Andrew Optimus Goldberg

회원 가입일: 2009년 10월 17일

402,430 평판

안내서 412개 작성하였습니다

iFixit iFixit 회원

Community

109 회원들

안내서 7,714개 작성하였습니다

When purchasing a new bottom panel, do any of the stickers or pads have to be transferred to the new part? How?

Matthew Parrott - 답글

This is the instructions on how to just remove the bottom cover to access other components. The part is sold here on iFixit for $99 and looks to include the rubber feet.

Cwoodyard -

Where can I get a new backover?

SkyGamer - 답글

The back cover is sold here and can be found at the top of the page.

Cwoodyard -

Can i buy this bottom replacement piece here or is this instructions on how to do it?

itsRadioBiz - 답글

조회 통계:

지난 24시간: 10

지난 7일: 93

지난 30일: 579

전체 시간: 41,951