기기를 수리하세요 커뮤니티 상점

MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement

소개

Remove the lower case to access the internal components of your MacBook Pro.

필요한 것

  1. MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement, Lower Case: 1 단계, 이미지 1/1

    • Remove the following ten screws:

    • Three 14.4 mm Phillips #00 screws

    • Three 3.5 mm Phillips #00 screws

    • Four 3.5 mm shouldered Phillips #00 screws

    • When replacing the small screws, align them perpendicular to the slight curvature of the case (they don't go straight down).

    번역하기

  3. MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement: 2 단계, 이미지 1/2 MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement: 2 단계, 이미지 2/2

    • Use your fingers to pry the lower case away from the body of the MacBook near the vent.

    • Remove the lower case.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 85명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Andrew Optimus Goldheart

회원 가입일: 10/17/09

502,749 평판

안내서 407개 작성하였습니다

배지: 44

배지 +41개 더

팀

iFixit iFixit 회원

Staff

135 회원들

안내서 16,732개 작성하였습니다

댓글 7개

When purchasing a new bottom panel, do any of the stickers or pads have to be transferred to the new part? How?

Matthew Parrott - 답글

This is the instructions on how to just remove the bottom cover to access other components. The part is sold here on iFixit for $99 and looks to include the rubber feet.

Cwoodyard -

Where can I get a new backover?

SkyGamer - 답글

The back cover is sold here and can be found at the top of the page.

Cwoodyard -

Can i buy this bottom replacement piece here or is this instructions on how to do it?

itsRadioBiz - 답글

댓글 쓰기

조회 통계:

24 시간 전: 14

7일 전: 41

30일 전: 137

전체 시간: 64,877