주요 콘텐츠로 건너뛰기

MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Cable Replacment

필요한 것

  1. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Cable Replacment, Battery: 1 단계, 이미지 1/1
    • Use your fingers to push both battery release tabs away from the battery, and lift the battery out of the computer.

  2. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Cable Replacment, RAM Shield: 2 단계, 이미지 1/1
    • Remove the three identical Phillips screws from the memory door.

  3. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Cable Replacment: 3 단계, 이미지 1/1
    • Lift the memory door up enough to get a grip on it, and slide it toward you, pulling it away from the casing.

  4. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Cable Replacment, Upper Case: 4 단계, 이미지 1/1
    • Remove the two 2.8 mm Phillips screws in the battery compartment near the latch.

  5. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Cable Replacment: 5 단계, 이미지 1/1
    • Remove the following 6 screws:

    • Two 10 mm T6 Torx screws on either side of the RAM slot.

    • Four 14.5 mm Phillips screws along the hinge.

  6. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Cable Replacment: 6 단계, 이미지 1/1
    • Remove the four 3.2 mm Phillips screws on the port side of the computer.

  7. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Cable Replacment: 7 단계, 이미지 1/1
    • Rotate the computer 90 degrees and remove the two 3.2 mm Phillips screws from the rear of the computer.

  8. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Cable Replacment: 8 단계, 이미지 1/1
    • Rotate the computer 90 degrees again and remove the four 3.2 mm Phillips screws from the side of the computer.

  9. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Cable Replacment: 9 단계, 이미지 1/1
    • Do not yank the upper case off quickly. The case is attached to the logic board via a ribbon cable.

    • Lift up at the rear of the case and work your fingers along the sides, freeing the case as you go. Once you have freed the sides, you may need to rock the case up and down to free the front of the upper case (there are some hidden plastic clips that need to be clicked off).

  10. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Cable Replacment: 10 단계, 이미지 1/1
    • Disconnect the trackpad and keyboard ribbon cable from the logic board, removing tape as necessary.

    • Remove the upper case.

  11. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Cable Replacment, Upper Case Cable Replacment: 11 단계, 이미지 1/1
    • Use a spudger to pry up the translucent plastic sheath covering the keyboard connector.

  12. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Cable Replacment: 12 단계, 이미지 1/1
    • Use the tip of a spudger to flip up the black plastic flaps locking down the keyboard and keyboard backlight ribbon cables.

  13. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Cable Replacment: 13 단계, 이미지 1/1
    • Slide the orange keyboard backlight ribbon out of its connector.

  14. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Cable Replacment: 14 단계, 이미지 1/1
    • Peel up the orange tape covering the keyboard backlight connector.

  15. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Cable Replacment: 15 단계, 이미지 1/1
    • Use the tip of a spudger to flip up the brown plastic flap locking down the keyboard backlight ribbon cable.

  16. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Cable Replacment: 16 단계, 이미지 1/1
    • Use a spudger or your finger to slide the keyboard backlight ribbon out of its connector.

  17. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Cable Replacment: 17 단계, 이미지 1/1
    • Disconnect the power button cable, the bluetooth cable, and the sleep sensor cable.

    • Carefully peel up the orange ribbon cable removing tape as necessary.

결론

To reassemble your device, follow these instructions in reverse order.

다른 7명이 해당 안내서를 완성하였습니다.

Matt Barnes

12,086 평판

안내서 3개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 4

전체 시간: 9,560