주요 콘텐츠로 건너뛰기

MacBook Pro 15" Retina Display Mid 2012 AirPort/Camera Cable Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. MacBook Pro 15" Retina Display Mid 2012 AirPort/Camera Cable Replacement, AirPort/Camera Cable: 1 단계, 이미지 1/1
    이 단계에 사용된 도구:
    Tweezers
    $4.99
    구매
    • Use a spudger or tweezers to pry the three AirPort antenna cables straight up off of their sockets on the AirPort board.

    • The cable connection points are fragile. Be careful to lift only on the connector, and not on the socket or cable.

    • To reconnect, align the connector carefully into position over the socket, and press it down firmly with the flat of your spudger.

  2. MacBook Pro 15" Retina Display Mid 2012 AirPort/Camera Cable Replacement: 2 단계, 이미지 1/1
    • Use the tip of a spudger to push the camera cable's plug toward the fan and out of its socket on the logic board.

    • The plug in the photo has six connections, but some models have twelve connections. The process of removing the plug from its socket is the same for both.

    • If the camera cable's plug won't come easily out of its socket on the logic board, fold back the rubber cover over the fan to gain access to the cable, then gently pull on the cable while using the spudger to gently push the plug out of its socket.

    • Be sure to push parallel to the board, first on one side, then the other, to slowly "walk" the plug out of its socket. Do not pry up, or you will damage the socket.

  3. MacBook Pro 15" Retina Display Mid 2012 AirPort/Camera Cable Replacement: 3 단계, 이미지 1/3 MacBook Pro 15" Retina Display Mid 2012 AirPort/Camera Cable Replacement: 3 단계, 이미지 2/3 MacBook Pro 15" Retina Display Mid 2012 AirPort/Camera Cable Replacement: 3 단계, 이미지 3/3
    • Insert the flat end of a spudger underneath the rubber heat sink cover on the right fan.

    • Slide the spudger underneath the length of the cover, releasing the adhesive.

    • Lift the cover and flip it back so that you can access the cables underneath.

  4. MacBook Pro 15" Retina Display Mid 2012 AirPort/Camera Cable Replacement: 4 단계, 이미지 1/3 MacBook Pro 15" Retina Display Mid 2012 AirPort/Camera Cable Replacement: 4 단계, 이미지 2/3 MacBook Pro 15" Retina Display Mid 2012 AirPort/Camera Cable Replacement: 4 단계, 이미지 3/3
    • Use your fingers to pull the AirPort/Camera cables up off the fan.

    • The cables are adhered to the fan, so peel them up carefully to avoid damaging them.

    • Carefully de-route the cables from the plastic cable guide.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Brett Hartt

회원 가입일: 04/12/10

127,977 평판

안내서 143개 작성하였습니다

iFixit iFixit 회원

Staff

136 회원들

안내서 17,430개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 13

전체 시간: 1,024