MacBook Pro 15" Retina Display Mid 2015 AirPort/Camera Cables Replacement

1 단계 AirPort/Camera Cables




• Use a spudger or tweezers to pry the three AirPort antenna cables straight up off of their sockets on the AirPort board, and bend them up and out of the way.
• The cable connection points are very fragile. Be careful to lift only on the connector, and not on the socket or cable.
• To reconnect, align the connector carefully into position over the socket, and press it down firmly with the flat of your spudger.
번역하기
댓글 40개
댓글 달기
댓글 쓰기
1024
취소 댓글 달기
2 단계



• Peel the right rubber cover up off the fan and fold it out of the way.
번역하기
댓글 달기
댓글 달기
댓글 쓰기
1024
취소 댓글 달기
3 단계
• Use the tip of a spudger to push the camera cable connector out of its socket on the logic board.
• Be sure to push parallel to the board, pushing first on one side, then the other to "walk" the connector out of its socket.
번역하기
댓글 10개
댓글 달기
댓글 쓰기
1024
취소 댓글 달기
4 단계
• Use your fingers to pull the AirPort/Camera cables up off the fan.
• The cables are adhered to the fan, so peel them up carefully to avoid damaging them.
• Carefully de-route the cables from the plastic cable guide.
• On reassembly, there should be enough adhesive still on these cables to stick them back down to the fan.
번역하기
댓글 5개
댓글 달기
댓글 쓰기
1024
취소 댓글 달기

작성자

다른 기여자 4명과 함께

Andrew Optimus Goldheart

회원 가입일: 10/17/09

502,810 평판

안내서 407개 작성하였습니다

배지: 44

• 
• 
• 

배지 +41개 더

팀

iFixit iFixit 회원

Staff

135 회원들

안내서 16,817개 작성하였습니다

해당 안내서 넣기

해당 안내서를 사이트/포럼에 작은 위젯으로 포함하려면 크기를 선택하고 아래 코드를 복사하십시오.

미리보기